Chapes à boules 2,0 mm

Reference: 060/11

Ball-end bolt 9.0 mm - M 2.5 x 6.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/8

Ball-end bolt 3.0 mm - M 3.0 x 9.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 107/8

Ball-links 2.0 mm

Ball joints for 2.0 mm thread are only applied at the tail rotor if the one piece control bridge Ord.No 100 is used. Contend of the package: 10 pieces.

Reference: 107/34

Ball-links 3.0 mm

We can supply large ball-links for M3 pushrods separately, for installation in your own projects. The length of the link is 22 mm, and its linkage ball is designed to accept an M3 machine screw. The largest diameter of the link is 13 mm.M3 ball-linkpack of 2

Reference: 060/20

Ball-end bolt 3.0 mm - M 3.5 x 7.5

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/5

Ball-end bolt 20.0 mm - M 3.0 x 7.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 107/49

Ball-links 3.0 mm

Pack of 25

Reference: 107/15

Ball link 3.0 mm

It is advisable to use stronger pushrods and balls with a larger diameter on demand. This combination often is selected by the pilots with airplanes as well.Ball-link for 3.0 mm pushrodpack of 10connector fits 5.5 mm ��balls

Reference: 060/9

Ball-end bolt 8,0 mm - M 3,5 x 3,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/55

Ball-end bolt 3.5 mm - M 2.5 x 7.0

Not available

Reference: 060/1

Ball-end bolt 9.5 mm - M 2.5 x 3.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 80/21

Ball retainer set

Ball joints, especially on helicopters that are flown actively by 3-D pilots, are subject to very strong forces. Due to necessary large control movements the ball joints can stretch over a period...

Reference: 107/48

Kugelgelenke für 3,0 mm Gestänge und 4,8er Kugel

Reference: 060

Ball-end bolt 3.5 mm - M 2.0 x 5.0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Reference: 060/12

Ball-end bolt 6.5 mm - M 3.0 x 6.0. dia 7.8 mm

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/7

Ball-end bolt 3.5 mm - M 2.5 x 5.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...