Marchi

Nessuna marca

Fornitori

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 12,80 €
Più
In vendita su richiesta
Tutte le migliori vendite

Ci sono 41 prodotti.

Visualizzati 13-24 su 41 articoli

Filtri attivi

Riferimento: 10/37

Silicone oil

Recensioni: 0

This clear, colourless silicone oil is particularly good for RC helicopters. Its excellent viscosity and temperature characteristics mean that it can be applied sparingly and remains effective for long periods (very low evaporation rate). Silicone oil is a surfactant lubricant which does not become greasy and contains no corrosive ingredients. It forms a...

Prezzo 11,39 €
Più
In vendita su richiesta

Riferimento: 10/124

Speedy Combine powder

Recensioni: 0

The Speedy Combine powder fills small holes, gaps at bulkheads and cracks when used in conjunction with cyano glue. The new surface can be sanded back and painted approx. 45 seconds after application. Content: 40 g

Prezzo 8,54 €
Più
In vendita su richiesta

Riferimento: 10/39

Thread-cutting oil

Recensioni: 0

Whether you are drilling holes or tapping threads you should not be without drilling and tapping oil; used sparingly it protects your tools and prolongs their active life. Content: 50 ml

Prezzo 7,73 €
Più
In vendita su richiesta

Riferimento: 16/4

Maintenance spray, 200 ml

Recensioni: 0

This spray is used to lubricate gear wheels, on which it deposits a film of microscopic thickness. Its composition displaces damp and prevents possible corrosion.The lubricant is non-adhesive and does not attract dust.We recommend that it should be used sparingly.

Prezzo 14,94 €
Più
In vendita su richiesta

Riferimento: 10/88

Mechanics cleaner

Recensioni: 0

An essential part of maintaining and looking after mechanical systems is cleaning. It should go without saying that cleaning is important, but that's not to say that it must be time-consuming. This spray cleaner contains the ideal cleaning agent for helicopter mechanics, and severe dirt and grease disappear at the touch of a button. It even removes...

Prezzo 23,28 €
Più
In vendita su richiesta

Riferimento: 10/125

Cyano glue, high viscosity

Recensioni: 0

"Instant" cyano-acrylate adhesives ("cyano") are high-strength glues which join materials of all types. Low viscosity (thin) for fine cracks and close-fitting joints; high viscosity (thick) for larger-area joints. Content: 20 g

Prezzo 11,39 €
Più
In vendita su richiesta

Riferimento: 10/36

Titanium grease

Recensioni: 0

Titanium grease has been specially developed as a high-performance grease for use in model helicopters. It provides a substantial reduction in friction between metal and plastic surfaces even under severe loads. It adheres extremely well, and thus stays on spur and bevel gears even at high rotational speeds. Application: bevel gears in main and tail...

Prezzo 11,70 €
Più
In vendita su richiesta

Riferimento: 10/367

Lubricant set

Recensioni: 0

All mechanics require the correct lubrication: not too much and not too little. If friction is low, the rate of wear is reduced. This lubricant set includes both lubricants required for complete protection of the mechanics. When re-greasing check carefully that no grit is allowed into the lubricant (abrasive effect), and clean all parts before...

Prezzo 19,90 €
Più
In vendita su richiesta

Riferimento: 10/126

Super glue (Cyno), Black

Recensioni: 0

Fast curing, black, rubber-filled adhesive, ideal for rubber or plastic bonds.Content: 20 g

Prezzo 11,39 €
Più
In vendita su richiesta

Riferimento: 10/76

Sanding primer for wood

Recensioni: 0

In full-fuselage helicopters the mechanical system is generally mounted on previously installed wooden bulkheads. If the bulkheads are to be painted, the wood surface must first be primed. Primer seals the pores in the wood and hardens projecting fibres; they can then be sanded off before the final painted finish is applied. Painting a primed component...

Prezzo 19,00 €
Più
In vendita su richiesta

Seguici su Facebook