Marchi

Nessuna marca

Fornitori

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 12,80 €
Più
In vendita su richiesta
Tutte le migliori vendite
Accessori

Accessori

Accessori

Filtri attivi

Riferimento: 11/41

Pin, for applying thread lock

Recensioni: 0

A Loctite pin is an essential tool for every workshop. Using the pin it is easy to apply the quantity of fluid you need in small threaded holes. The pin is chrome-plated so that the fluid can easily be wiped off again.

Prezzo 6,20 €
Più
In vendita su richiesta

Riferimento: 90/37

Point oiler

Recensioni: 0

The point oiler allows you to reach inaccessible areas of the model, and apply finely metered quantities of oil just where you want them. The point oiler has a flexible lubricant reservoir in the handle. The oil level is easy to see, and the unit can be refilled by unscrewing the stainless steel probe. The unit is totally leak-proof; no oil will ever escape.

Prezzo 13,30 €
Più
In vendita su richiesta

Riferimento: 10/68

Adhesive weights

Recensioni: 0

The Centre of Gravity of any helicopter must be exactly right. For you this means checking your completed and fully assembled helicopter against the building instructions: the slightest modification to the model's construction may well cause a change in the model's balance, and you can correct this either with an additional battery (providing the gyro...

Prezzo 6,40 €
Più
In vendita su richiesta

Riferimento: 10/76

Sanding primer for wood

Recensioni: 0

In full-fuselage helicopters the mechanical system is generally mounted on previously installed wooden bulkheads. If the bulkheads are to be painted, the wood surface must first be primed. Primer seals the pores in the wood and hardens projecting fibres; they can then be sanded off before the final painted finish is applied. Painting a primed component...

Prezzo 19,00 €
Più
In vendita su richiesta

Seguici su Facebook