Marchi

Nessuna marca

Riferimento: 10/90

Canopy latch

Recensioni: 0

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Prezzo 6,20 €
Più
In vendita su richiesta

Riferimento: 060

Ball-end bolt 3.5 mm - M 2.0 x 5.0

Recensioni: 0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Prezzo 13,80 €
Più
In magazzino
Tutte le migliori vendite
  • Networkcode Tech Solution SL

Giunti

Giunti

Giunti

Ci sono 39 prodotti.

Visualizzati 1-12 su 39 articoli

Filtri attivi

Riferimento: 49/9

Four-screw fixing, shaft 5 mm

Recensioni: 0

Contrary to common opinion steel wires should only be degreased before mounting, but not sanded. This would cause running out-of-centre. After the change steel drive wire you should not use the grubscrews anymore. The max. force originates each with starting (turning up the system), i.e. over a longer period the shaft leaves it's marks on the surfaces of...

Prezzo 19,70 €
Più
In vendita su richiesta

Riferimento: 49/56

Articulated gearbox connector, shaft 5 mm

Recensioni: 0

This gearbox connector is useful for an installation into main gearboxes on helicopters of the Sky Fox series. The length of the shaft is harmonised to fit into tail gearboxes with GRP housing as well as with aluminium housing.Articulated gearbox connector5 mm ∅ shaft, 22 mm

Prezzo 33,90 €
Più
In vendita su richiesta