Marchi

Nessuna marca

Riferimento: 10/90

Canopy latch

Recensioni: 0

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Prezzo 6,20 €
Più
In vendita su richiesta

Riferimento: 060

Ball-end bolt 3.5 mm - M 2.0 x 5.0

Recensioni: 0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Prezzo 13,80 €
Più
In magazzino
Tutte le migliori vendite
  • Networkcode Tech Solution SL

Attrezzi / Colle / Lubrificanti

Attrezzi / Colle / Lubrificanti

Attrezzi / Colle / Lubrificanti

Ci sono 157 prodotti.

Visualizzati 1-12 su 157 articoli

Filtri attivi

Riferimento: 10/77

Sanding sponge

Recensioni: 0

The primary use for abrasive sponges is for large-area sanding of wooden and GRP components, but they are also excellent for rubbing down filled surfaces when used wet. Abrasive sponges are also useful for fine-sanding of components with sharp edges and rounded surfaces.

Prezzo 4,90 €
Più
In vendita su richiesta

Riferimento: 11/27

Circlip pliers

Recensioni: 0

Installing and removing the circlip on the main rotor shaft, these circlip pliers do the job and will not damage the circlip. The prongs of the pliers fit exactly in the holes in the circlip and open it evenly, without over-stressing it, so that it can safely be re-used. If you use other tools such as screwdrivers etc. the circlip is easily damaged or...

Prezzo 29,80 €
Più
In vendita su richiesta

Riferimento: 11/91

Open-end spanner, size 4 and 5

Recensioni: 0

For real pleasure in modelling a comprehensive set of tools is indispensable, as it ensure that you always have the right tool for the job on hand. These small open-ended spanners are perfect for tightening or undoing standard and self-locking nuts, in the sizes M 2, M 2.5, M 3, M 4 etc. The range available covers all the sizes which are required for a...

Prezzo 11,90 €
Più
In vendita su richiesta

Riferimento: 1/11

Allen key imperial

Recensioni: 0

An imperial Allen key is sometimes your last chance of rescuing a grubscrew whose hexagon socket has given up. This Allen key is only one tenth of a millimetre larger than the standard metric key, but in most cases it will successfully loosen a screw where the socket has been damaged. Heat up the Allen key before you apply it, and the heat will help to...

Prezzo 6,20 €
Più
In vendita su richiesta

Riferimento: 11/0

Allen key set, 7-part

Recensioni: 0

Allen key set, extra-length, with ball-end. Contains all sizes for mechanics, including imperial Allen key for damaged grubscrews.

Prezzo 21,10 €
Più
In vendita su richiesta

Riferimento: 107/0

Ball-link driver with handle

Recensioni: 0

This tiny tool is designed to help you screw pushrods into ball-links. It can either be used in the chuck of an electric drill, in the telescopic handle, or in a 5.5 mm socket.  Ball-link driverwith telescopic handle 11/44

Prezzo 19,20 €
Più
In vendita su richiesta

Riferimento: 11/31

Wire cutters for steel wire

Recensioni: 0

The 2 mm pushrod from the tail rotor servo to the tail rotor bellcrank is made of hardened steel, as is the 2 mm tail rotor shaft. If you need to cut this material to length you need wire cutters which cut cleanly. These wire cutters are the ideal tool for cutting hardened steel wire. Wear protective goggles!

Prezzo 47,40 €
Più
In vendita su richiesta

Riferimento: 11/92

Open-end spanner, size 4.5 and 5.5

Recensioni: 0

For nut M 2 (flat) + nut M 3. For real pleasure in modelling a comprehensive set of tools is indispensable, as it ensure that you always have the right tool for the job on hand. These small open-ended spanners are perfect for tightening or undoing standard and self-locking nuts, in the sizes M 2, M 2.5, M 3, M 4 etc. The range available covers all the...

Prezzo 11,90 €
Più
In vendita su richiesta