Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Aste 3,0 x 75 mm Anteprima

Riferimento: 70/76

Aste 3,0 x 75 mm

Recensioni: 0

Ready-made pushrod, threaded M 3. Content of the package: 1 piece

Prezzo 6,30 €
Più
In vendita su richiesta
Tutte le migliori vendite

Ci sono 156 prodotti.

Ordina per:
Rilevanza Nome, da A a Z Nome, da Z ad A Prezzo, da meno caro a più caro Prezzo, da più caro a meno caro
Visualizzati 49-60 su 156 articoli

Filtri attivi

Flybar spirit level Anteprima

Riferimento: 79/1

Flybar spirit level

Recensioni: 0

To adjust the pitch of the main rotor blades accurately it is essential to set the flybar exactly horizontal. This is done by simply hanging a spirit level from the flybar. But make sure that the helicopter is standing on a level surface before you start!

Prezzo 17,00 €
Più
In vendita su richiesta
complete socket spanner set Anteprima

Riferimento: 111/10

complete socket spanner set

Recensioni: 0

The kit contains:Ord.No. 111/11   telescope armOrd.No. 111/12   Phillips PH2Ord.No. 111/13   Phillips PH1Ord.No. 111/14   SW 3.0Ord.No. 111/15   SW 4.0Ord.No. 111/16   SW 5.0Ord.No. 111/17   SW 6.0

Prezzo 99,90 €
Più
In vendita su richiesta
Twist drill 2.0 mm Anteprima

Riferimento: 11/71

Twist drill 2.0 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Glasspaper file, flat Anteprima

Riferimento: 11/28

Glasspaper file, flat

Recensioni: 0

If you enjoy building full-fuselage models you cannot help but appreciate practical tools which make your work easier. The glasspaper file is ideal for final trimming of openings for windows, doors and vent grilles after machining them out. The file is 25 cm long overall, with a sanding area 13 cm long and 2.5 cm wide on each side. The file is supplied...

Prezzo 14,80 €
Più
In vendita su richiesta
Allen key M 4 grub screw Anteprima

Riferimento: 11/3

Allen key M 4 grub screw

Recensioni: 0

Individual Allen key from the set Ord.No. 11/0:Allen key - for M 4 grub screw and for socket-head cap screw M 2.5

Prezzo 6,60 €
Più
In vendita su richiesta
Rotor head immobiliser Anteprima

Riferimento: 79/3

Rotor head immobiliser

Recensioni: 0

Working on the pitch adjustment of the main rotor blades requires a few conditions. First of all your helicopter must be standing on a flat level surface; the flybar must be horizontal and remain so throughout the procedure. The smooth running of all components with bearings makes this an almost impossible task because the slightest movement during pitch...

Prezzo 19,40 €
Più
In vendita su richiesta
Twist drill 2.5 mm Anteprima

Riferimento: 11/72

Twist drill 2.5 mm

Recensioni: 0

When screwing together parts in the mechanics (direct linkage) Allen screws are preferable to normal screws; use M 2.5 for Futaba servos and M 3 for Graupner / JR servos. We supply all required sizes of drills and taps for the work on your model helicopter.

Prezzo 5,50 €
Più
In vendita su richiesta
Rotor blade allen key for... Anteprima

Riferimento: 33/11

Rotor blade allen key for M5 socket-head screws

Recensioni: 0

Rotor blades for large-scale model helicopters must be secured using screws of the appropriate size. Normally M4 bolts are employed, but here the usual size is M5. The T-handle of this M5 allen key provides plenty of torque, but you should only tighten the screws to the point where the blades can still align themselves at start-up.

Prezzo 11,70 €
Più
In vendita su richiesta
Allen key set Anteprima

Riferimento: 111/20

Allen key set

Recensioni: 0

the kit contains:Ord.No. 11/47 SW 1,5Ord.No. 11/48 SW 2,0Ord.No. 11/49 SW 2,5Ord.No. 11/50 SW 3,0Ord.No. 11/54 SW 4,0

Prezzo 75,60 €
Più
In vendita su richiesta
Torna all'inizio

Seguici su Facebook

Facebook