Marchi

Nessuna marca

Fornitori

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Tutte le migliori vendite
Attrezzi / Colle / Lubrificanti

Attrezzi / Colle / Lubrificanti

Attrezzi / Colle / Lubrificanti

Ci sono 16 prodotti.

Visualizzati 1-12 su 16 articoli

Filtri attivi

  • Categorie: Attrezzi per il montaggio
  • Categorie: Pinze e cutters

Riferimento: 11/27

Circlip pliers

Recensioni: 0

Installing and removing the circlip on the main rotor shaft, these circlip pliers do the job and will not damage the circlip. The prongs of the pliers fit exactly in the holes in the circlip and open it evenly, without over-stressing it, so that it can safely be re-used. If you use other tools such as screwdrivers etc. the circlip is easily damaged or...

Prezzo 36,50 €
Più
In vendita su richiesta

Riferimento: 11/0

Allen key set, 7-part

Recensioni: 0

Allen key set, extra-length, with ball-end. Contains all sizes for mechanics, including imperial Allen key for damaged grubscrews.

Prezzo 26,60 €
Più
In vendita su richiesta

Riferimento: 11/31

Wire cutters for steel wire

Recensioni: 0

The 2 mm pushrod from the tail rotor servo to the tail rotor bellcrank is made of hardened steel, as is the 2 mm tail rotor shaft. If you need to cut this material to length you need wire cutters which cut cleanly. These wire cutters are the ideal tool for cutting hardened steel wire. Wear protective goggles!

Prezzo 54,60 €
Più
In vendita su richiesta

Riferimento: 11/39

Fine-point screwdriver set

Recensioni: 0

The fine point screwdriver set contains 6 selected socket spanners for 12 different applications: for M 3 and M 4 grubscrews, M 3 and M 4 socket-head cap screws (with ball-shaped head each), and for large and small slot-head scews; all together with a ball-link driver (4 mm connection), a handy grip and a tool bag. Insert the required socket spanner to...

Prezzo 94,20 €
Più
In vendita su richiesta

Riferimento: 11/37

All-purpose pliers

Recensioni: 0

With these practical, small general purpose pliers you can reach almost all your mechanical parts. These pliers rest nicely in your hand because of the non-slip grips. Overall length 12 cm

Prezzo 12,80 €
Più
In vendita su richiesta

Riferimento: 11/15

Pocket Allen key set

Recensioni: 0

This practical pocket-sized tool contains a set of fold out Allen keys in exactly the sizes you need when working on model helicopters. The set is compact and handy, all the keys are ready to use at any time, and the small keys will not longer disappear whenever you glance away. The pocket Allen key set is ideal for use at the flying site.  Pocket Allen...

Prezzo 36,50 €
Più
In vendita su richiesta

Riferimento: 11/99

Ball-link pliers

Recensioni: 0

When you are carrying out maintenance work on your mechanics or adjusting the mechanical linkages, e.g. to reset blade tracking, you have to push the ball-links off their pivot balls.These special ball-link pliers help you carry out this little task easily and without damaging the links. It is made of high-quality steel, and can be used both to disconnect...

Prezzo 54,60 €
Più
In vendita su richiesta

Riferimento: 11/30

Rotor head setting-up tools

Recensioni: 0

Rotor head setting-up tools for the main rotor blades, incl. caseYou "Old hands" at the helicopter game know all about the essential setting-up aids, and have done so for years, but if you are a beginner, you may only just be finding out about them. One essential aid is a set of setting-up tools for the main rotor.Whenever you need to set blade pitch,...

Prezzo 94,20 €
Più
In vendita su richiesta

Riferimento: 11/35

Tool case set

Recensioni: 0

We strongly recommend that when you begin assembling your first helicopter you use the correct combination of tools right from the start. This tool case includes Allen keys for grubscrews from M 3 to M 5, a straight-point screwdriver, a cross-point screwdriver, M 3 and M 4 box spanners and thread-lock fluid. The ball-link driver fits into the small box...

Prezzo 94,20 €
Più
In vendita su richiesta

Riferimento: 11/85

Pushrod calipers

Recensioni: 0

Model helicopter building instructions always state pushrod length as measured from ball centre to ball centre.Determining this dimension using conventional measuring tools is not really much more accurate than estimating the length.complete with measuring holders

Prezzo 43,90 €
Più
In vendita su richiesta

Riferimento: 111/10

complete socket spanner set

Recensioni: 0

The kit contains:Ord.No. 111/11   telescope armOrd.No. 111/12   Phillips PH2Ord.No. 111/13   Phillips PH1Ord.No. 111/14   SW 3.0Ord.No. 111/15   SW 4.0Ord.No. 111/16   SW 5.0Ord.No. 111/17   SW 6.0

Prezzo 99,90 €
Più
In vendita su richiesta

Riferimento: 111/20

Allen key set

Recensioni: 0

the kit contains:Ord.No. 11/47 SW 1,5Ord.No. 11/48 SW 2,0Ord.No. 11/49 SW 2,5Ord.No. 11/50 SW 3,0Ord.No. 11/54 SW 4,0

Prezzo 75,60 €
Più
In vendita su richiesta

Seguici su Facebook