Anello in silicone per il sistema di avviamento

Riferimento: 28/9

Set di clip di coccodrillo

For example, the glow plug connector permanently installed in the model may consist of a crocodile clip (or the plug clip 4308), a solder tag for the earthing to the heat-sink head, a panel mounting socket and a cable.Crocodile clip set, also known as Aligator clip

Riferimento: 67/47

Mutter 5/16" 24 UNF, WE P5 + 4Takt

Riferimento: 28/13

Contatto placcato in oro

 Content of the package1 piece

Riferimento: 16/1

Spray nero opaco resistente al calore

Riferimento: 67/43

Adattatore di avviamento per 1/4

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 1/4" -28 UNF crankshaft threade.g. at O.S. engines

Riferimento: 7/68

Startadapter, GFK

Riferimento: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Riferimento: 870/36

Rotella X-Treme, 10 mm

 Content of the package1 piece

Riferimento: 67/48

Cono di avviamento

Component part for starter adaptor 67/41, 67/42 or 67/43.

Riferimento: 64/66

Luftschrauben-Set

Riferimento: 115/11

Tubo in PTFE 20 x 2,5 x 100 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Riferimento: 115/15

Tubo flessibile 12 x 170 mm

 Content of the package1 piece

Riferimento: 64/50

Estensione per il bagagliaio, albero da 150 mm

The starter system with 10 mm freewheel and hexagon shaft has proved excellent in practice. If you own this system and wish to use it to start engines with a propeller fitted, or use it on a fan with its outer cone, you can convert the starter system very easily.

Riferimento: 28/11

Cavo al silicio per candela di piombo

Silicon cable for glow plug connector; it's highly flexible, exellent suited for use as glow plug connetor cable. Content: approx. 1 m

Riferimento: 67/44

Nut, M 8

 Content of the package1 piece

Riferimento: 116/2

Clip a molla tubolare in teflon

 Spring clippack of 2for mounting PTFE pipes 115/11