Home
Marchi

Nessuna marca

Fornitori
Migliori vendite
Flanged ballrace 6 x 10 x 3 mm Anteprima

Riferimento: 92/91

Flanged ballrace 6 x 10 x 3 mm

Recensioni: 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prezzo 14,70 €
Più
In vendita su richiesta
Tutte le migliori vendite

pinion gear 20-tooth

64/42
Valutazione 
Clutch pinion gear
  • incl. flywheel and split taper collet
  • 20-tooth
  • module 1
  • material: aluminium
  • twin ballraced
  • incl. clutch lining
  • fits the glow plug motor
86,90 €
Tasse incluse
Quantità
In vendita su richiesta

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descrizione
Clutch pinion gear
  • incl. flywheel and split taper collet
  • 20-tooth
  • module 1
  • material: aluminium
  • twin ballraced
  • incl. clutch lining
  • fits the glow plug motor
Dettagli del prodotto
64/42
Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi la tua recensione

pinion gear 20-tooth

pinion gear 20-tooth

Clutch pinion gear
  • incl. flywheel and split taper collet
  • 20-tooth
  • module 1
  • material: aluminium
  • twin ballraced
  • incl. clutch lining
  • fits the glow plug motor
Scrivi la tua recensione
16 autres produits dans la même catégorie :
Flywheel puller Aperçu rapide

Référence: 64/2

Flywheel puller

Commentaire(s): 0

If the flywheel of the clutch is sitting to tight on the tapper of the collet you can use this flywheel puller.For this purpose you remove the nut from the crankshaft, then put the puller on the crankshaft, and turn both socket-head cap screws equally approx. 5 mm into the thread of the flywheel; the flywheel loosens now.The length of the socket-head cap...

Prix 11,20 €
Détails
En vente sur demande
lining 45 x 40 x 12 mm Aperçu rapide

Référence: 64/8

lining 45 x 40 x 12 mm

Commentaire(s): 0

Friction between the flywheel and the clutch bell result in a certain amount of wear of the clutch lining.For installation you slightly grind one of the outer edges. Afterwards you press the liner with that edge in front into the clutch bell. To glue in a new clutch liner you use e.g. UHU plus endfest 300, Ord.No. 10/26 or 10/27.Fits the glow plug motor...

Prix 27,40 €
Détails
En vente sur demande
pinion gear 24-tooth Aperçu rapide

Référence: 64/36

pinion gear 24-tooth

Commentaire(s): 0

Clutch pinion gearincl. flywheel and split taper collet24-toothmodule 1material: aluminiumtwin ballracedincl. clutch liningfits the glow plug motor

Prix 114,50 €
Détails
En vente sur demande
pinion gear 22-tooth Aperçu rapide

Référence: 64/20

pinion gear 22-tooth

Commentaire(s): 0

Clutch pinion gear incl. flywheel and split taper collet 22-tooth module 1 material: GRP twin ballraced incl. clutch lining fits the glow plug motor

Prix 75,80 €
Détails
En vente sur demande
Toothed belt clutch 23-tooth Aperçu rapide

Référence: 833/64

Toothed belt clutch 23-tooth

Commentaire(s): 0

Toothed belt clutchincl. flywheel and split taper collet23-toothpitch 3Mmaterial: aluminiumtwin ballracedincl. clutch liningfits the glow plug motorfor engines up to max. 8.5 cc onlyfits the Sky Dragon model

Prix 99,90 €
Détails
En vente sur demande
Split taper collet 8 mm Aperçu rapide

Référence: 64/5

Split taper collet 8 mm

Commentaire(s): 0

Split taper collet 8 mmmaterial: brassfits the glow plug motor clutchA split taper collet has to be assembled so that it fits tightly onto the crankshaft of the engine.If there are problems sliding the split taper collet easily onto the crankshaft, please insert a screwdriver into the slot and try to open it gently. It should now slide onto the shaft...

Prix 11,20 €
Détails
En vente sur demande
Ballrace 8 x 16 x 5 mm Aperçu rapide

Référence: 64/3

Ballrace 8 x 16 x 5 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear.The dimensions of a ballrace mean:inside diameter (I.D.) x outside diameter (O.D.) x thickness. Ballrace 8 x 16 x 5 mmpack of...

Prix 13,50 €
Détails
En vente sur demande

Seguici su Facebook

Facebook