Tail boom de 31 x 1,0 x 1.200 mm

Riferimento: 17/68

Mittenlagerungs-Set 25 mm

Riferimento: 832/13

Barra di coda 25 x 820mm

Not available

Riferimento: 808/13

Braccio di coda 20x0,5x790mm nero, rigato

Not available

Riferimento: 722/46

Kupplungslager Heckrohr

Riferimento: 314

Tail boom de 25 x 0,8 x 790 mm, violeta

Tail boomdimensions: 25 x 0.8 x 790 mmblack

Riferimento: 834/70

Supporto del braccio posteriore, 25 mm

A 2-part GRP tail boom holder keeps a firm hold on the 25 mm ��tail boom. The tail boom holder is screwed between the side frames with socket-head cap screws M 3 x 55 (Ord.No. 90135).

Riferimento: 8/5

Heckservo-Halter 25 mm

Riferimento: 49/1

Glocke mit Stellring

Riferimento: 311

Braccio di coda da 25 x 0,8 x 820 mm

 Tail boom25 x 0.8 x 820 mmblack

Riferimento: 21/15

Kohlefaser-Set für 20 mm

Riferimento: 319

Braccio della coda di 25 x 0,8 x 790 mm, argento

 Tail boom25 x 0.8 x 790 mmsilver

Riferimento: 301

Braccio di coda 20 x 0,8 x 900 mm, titanio

 Tail boom20 x 0.8 x 900 mmtitanium

Riferimento: 907/2

Servo mount

Use this special servo mount for installing the throttle servo on the base plate.

Riferimento: 313

Braccio di coda di 20 x 0,5 x 790 mm

 Tail boom20 x 0.5 x 790 mmblackweight 59 gTail booms with a wall thickness of 0.5 mm are specially tested for the use in models with electric drive only and must not be used for models powered by combustion engines! The wall thickness is just 0.5 mm for the reduction of weight. Comparative, the weight of a tail boom with 0.8 x 20 x 790 mm is 109 g.

Riferimento: 139/13

Barra di coda 25 x 910 mm

Not available

Riferimento: 800/2

Leitwerkhalter 20 mm, 2-teilig