Trainer

Riferimento: 13/9

Kufenrohr 10 mm, schwarz

Riferimento: 8303

BENZIN Acrobatic

Riferimento: 800/24

Stabilizzatore grande

If you fit a large stabiliser to your trainer there is no need for a tail skid. This stabiliser provides the tail rotor blades with enough ground clearance, and offers good flight stability at low airspeeds. There are two versions with different methods of attachment.height 275 mm118 g total weightwith clamp for 20 mm Ø tail booms

Riferimento: 302/1

Barra di coda 20 x 900 mm

Not available

Riferimento: 10/90

Canopy latch

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Riferimento: 810/9

Sky Fox white incl. decor

White canopy with smoked windows.If prefered the canopies of the Sky Fox series can be interchanged.They are pre-finished, decals annexed.Please take care to always choose the correct length canopy holder.

Riferimento: 10/43

Kufenendkappe 12 mm

Riferimento: 8009

Helicopter kit Sky Fox

Riferimento: 2682

XLC V2 lifting helicopter

The XLC helicopter is designed as a load-carrier, and is capable of transporting a payload of up to 15 kg in addition to its airframe weight of around 17 kg. The fuel tank capacity of around 9.5 litres is also generous, permitting extended flight times. However, please note that a full tank halves the maximum possible payload. The low vibration levels of...

Riferimento: 800/39

Sliding cabin holder, alone

Sliding cabin holder, alone.

Riferimento: 301

Braccio di coda 20 x 0,8 x 900 mm, titanio

 Tail boom20 x 0.8 x 900 mmtitanium

Riferimento: 800/50

Stabilizzare 3-D, fibra di carbonio

When you are attempting high-speed flying in reverse and also certain pirouettes you may find that the helicopter's heading changes due to the influence of the solid vertical stabiliser. That is the basic reason for the development of this special 3-D tail.It is very strong, and its large size removes the need for a tail skid. The stabiliser is...