Double ball-link for rotor head

Référence: 68/26

Raccord droit

Swashplate link piece, straight. Content of the package: 2 pieces

Référence: 707

Rotor cap for Multi blade head

The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).

Référence: 703/340

Washer for fastening multi-blade head

Not available

Référence: 480/54

Anillo de sujeción plateado con 3 orificios

Référence: 79/10

Barre de Bell inox 4 x 510 mm

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Référence: 707/5

Rotor head cover for 5-blade head

The multi-blade rotor heads of full-size helicopters are generally fitted with protective covers; this applies to the Ecureuil, the Dauphin, the Eurocopter EC 135 and 145, the MD Hughes, etc. Rotor head covers also look good on your model, and we stock them with indentations corresponding to the number of blade grips. The covers are made of CFRP and can...

Référence: 72/50

Electro rotor head centre piece

Electro rotor head centre piece, alu.

Référence: 702/79

Flybar stainless steel 5 x 270 mm

Pack of 2

Référence: 832/70

Mixer arms, aluminium

Mixer arms, aluminium Content of the package: 2 pieces

Référence: 702/96

Inertia weights

set of 2

Référence: 10/81

Tube silicone 5 x 7 x 100 mm

 Silicone sleeve5 x 7 x 100 mmtransparent

Référence: 770/36

Spacer for rotor cap BK117

Not available

Référence: 82/30

Rocker kit Bell UH / Bell 212 / Bell 47

Not available

Référence: 71/56

Pièce centrale en alu Ø 12 mm

Pitch mixer centre piece, aluminium, 12 mm Ø

Référence: 74/14

O-ring 3 x 16 mm soft

O-ring 3 x 16 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Référence: 707/2

Rotor head cover for 4-blade head

Rotor head cover for 4-blade head incl. screw.Laminated of carbonapprox. 120 mm ∅, 25 mm high