

Ninguna marca
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Reference: 74/5
O-ring 3 x 7 mm soft Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Reference: 71 A
Centre piece for pitchcompensator, GFK, alone.
Reference: 832/78
This mixer lever from aluminium matches the dimensions of the rotor head 722/72 (e.g. model Robinson R22) with a max. rotor disc of 2 500 mm.
Reference: 72/45
Aluminium centre piece for 12 mm Ø main shaft
Reference: 54/13
On longer rotor shafts the clamp ring for the pitch compensator sits underneath of the centre piece directly on the rotor shaft.Clamp ring for pitch compensator 10 mm Ø, length of the pin 30 mm.
Reference: 71/18
Content of the package2 pieces
Reference: 87/4
A 90° twisted double ball-link connect the mixer lever to the ball collet on the flybar. Content of the package: 2 pieces
Reference: 79/15
The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.
Reference: 72/18
Aluminium centre piece, rigid, for 10 mm main shaft
Reference: 76/8
Ballrace spacer, steel Content of the package: 1 piece.
Reference: 86
Ball collets provide the fixation of double ball-links on the flybar, in order to settle the essential distance to the rocker. Ball collet 4 mm Ø, pack of 2, chrome-plated.
Reference: 82/32
Washer for variable rocker 4 mmContent of the package: 2 pieces
Reference: 702/76
This blade holder was specially developed for the large Bell 47 G III with a rotor diameter of 2.36 m. It has a 22 mm blade throat and a 6 mm Ø bore for the retaining screw, i.e. the matching blade holder screws and self-locking nuts are M6 in size.