Blindnabe mitdrehender Heckrotor, rechts

Reference: 67/43

Starter adaptor for 1/4" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 1/4" -28 UNF crankshaft threade.g. at O.S. engines

Reference: 28/9

Crocodile clip set

For example, the glow plug connector permanently installed in the model may consist of a crocodile clip (or the plug clip 4308), a solder tag for the earthing to the heat-sink head, a panel mounting socket and a cable.Crocodile clip set, also known as Aligator clip

Reference: 115/13

Flex hose 12 x 100 mm

 Content of the package1 piece

Reference: 870/54

Belt tension roller bearer, X-Treme

Belt tension roller bearer. Content of the package: 1 piece.

Reference: 67/42

Starter adaptor for M 8 crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 8 mm crankshaft threade.g. at Rossi engines

Reference: 116/2

Spring clip for PTFE tube

 Spring clippack of 2for mounting PTFE pipes 115/11

Reference: 64/66

Luftschrauben-Set

Reference: 830/25

Flexschlauch für Kühlluftführung

Reference: 13/25

Válvula de llenado para metanol y bencina

Reference: 115/11

PTFE pipe 20 x 2.5 x 100 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 67/41

Starter adaptor for 5/16" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 5/16" -24 UNF crankshaft threade.g. at Webra P5 and 4-stroke engines

Reference: 67/48

Starter cone

Component part for starter adaptor 67/41, 67/42 or 67/43.

Reference: 115/5

PTFE pipe 20 x 2.5 x 120 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 116/17

Flex hose screw fittings set

  Content of the package complete as shown

Reference: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Reference: 67/16

Silicone ring for starter system

Silicone ring for starter system Ord.No. 67/13 pack of 1