Anlassadapter für 1/4"-28 UNF

Reference: 1024/25

O-Ring 18 mm für VergaserhalsOrd.No. 1024/25

Reference: 870/36

Freewheel for X-Treme, 10 mm

 Content of the package1 piece

Reference: 67/48

Starter cone

Component part for starter adaptor 67/41, 67/42 or 67/43.

Reference: 67/44

Nut, M 8

 Content of the package1 piece

Reference: 67/42

Starter adaptor for M 8 crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 8 mm crankshaft threade.g. at Rossi engines

Reference: 115/5

PTFE pipe 20 x 2.5 x 120 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 67/41

Starter adaptor for 5/16" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 5/16" -24 UNF crankshaft threade.g. at Webra P5 and 4-stroke engines

Reference: 115/15

Flex hose 12 x 170 mm

 Content of the package1 piece

Reference: 13/25

Válvula de llenado para metanol y bencina

Reference: 28

Glow plug connector set

 Content of the packagecomplete as shown

Reference: 7/68

Startadapter, GFK

Reference: 870/44

Distanzhülsen X-Treme Mechanik

Reference: 870/48

Alu-Lagerplatte

Reference: 830/25

Flexschlauch für Kühlluftführung

Reference: 25/9

Heat reflective mat

Between fuselage and exhaust tube a heat-reflecting mat avoids melting of the fibreglass. Even in smaller fuselages where conventional silencer systems are close to the inside surface, the heat reflective mat is useful as a heat shield.Heat reflective matheat rejectingsize approx. 300 x 700 mmmat thickness approx. 3 mm

Reference: 67/15

Special screw for starter system

Special screw for starter system Ord.No. 67/13 pack of 1