Blind hub

Reference: 15/7

Eje intermedio

Reference: 49 B

Collet 2 mm

 Content of the package1 piece

Reference: 260/53

Base plate XLV

Base plate XLV.

Reference: 240/53

dome extension 78 mm

aluminum

Reference: 260/50

Side frame XLV

Side frame XLV. The two side frames are identical in size an shape. Content of the package: 1 piece.

Reference: 870/200

R. H. conversion set X-Treme

For the conversion of a L.H. X-Treme trainer into a R.H. mechanics needed parts are assembled in this set. This set contains all the parts required for the conversion of a L.H. X-Treme trainer into R.H. mechanics.

Reference: 722/49

Tube drive adapter for shaft 8 mm

Content of the package: 1 piece

Reference: 163

Collet 3 mm

Pack of 2 incl. screws

Reference: 260/36

Freewheel for 12 mm shaft

Not available

Reference: 830/50

Side frame petrol mechanics

Side frame for petrol mechanics. The two side frames are identical in size an shape. Content of the package: 1 piece.

Reference: 49/55

Yoke connector, shaft 5 mm

This slotted connection shaft holds the loop of the 2 mm tail drive wire. Like all other tail drive systems it is necessary to install "play" (approx. 1 mm) for the wire. Yoke connector5 mm diameter shaft

Reference: 268/36

Freewheel for 15 mm shaft

for XLC

Reference: 1006/15

Aluminium main gear box

This is what we recommend to ensure a transfer of power of today’s electric motors with their torque:a new aluminium main gear box Ord.No. 1006/15 steel internal tooth gear with matching clutch bell Ord.No. 36/48.

Reference: 834/50

Side frame for BENZIN Acrobatic

The outstanding features of the BENZIN Acrobatic models are mainly based on these side frames. The engine moved to the front to optimise the CofG.Installation of an on-board electric starter as an option.CCPM - i.e. direct linkage at 4-points / 90 degreeInstallation of the tank below the main rotor shaft, i.e. while the tank runs dry the CofG does not...

Reference: 7/51

Side frame right

Component part for foxy, Ord.No. 7007

Reference: 107/42

Balls chrome-plated 2.0 x 4.8 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.