H145 (EC145 T2) 1:5 - Fuselage kit

Reference: 704/36

4-blade rotor head 12 mm

Rotor heads with three or more rotor blades really deserve their own chapter in any discussion of model helicopters; speculation is always in the air at such times, because sooner or later most...

Reference: 1002/1000

Electric mechanics L

Brand new dome mechanics which is especially designed for the scale model electric flight and allows full cockpit detail. This mechanics is suitable for fuselage kit Ord.No. 1470. Electric motors are quiet, low in vibration, without exhaust gases and residual thrust. The blade slap noise of the rotor blades is more noticeable than with other types of...

Reference: 68/50

Swashplate driver 12 mm

 Swashplate driver, metal4 ballracesweigth approx. 25.8 gsuitable for 12 mm Ø main shafts

Reference: 707/2

Rotor head cover for 4-blade head

Rotor head cover for 4-blade head incl. screw.Laminated of carbonapprox. 120 mm ∅, 25 mm high

Reference: 707

Rotor cap for Multi blade head

The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).

Reference: 93/45

, 10 blade H145 T2

10 blade Fenestron for use in the Vario H145 T2 - Ord.No. 1470. Including high-quality carbon fiber blades. Very good efficiency.

Reference: 92/76

90° angle gearbox

90° angle gearbox for Fenestronwith aluminium housingkit-formcomplete as shown

Reference: 34/91

CFK-Cap for , 10-Blade

For the 10-blade Fenestron, as used in the EC 135, this cap is made ​​of carbon fiber. For the ECs with Rotorkreis 1,60m / 1,68 m, Ord.No. 1320 – 1330 – 1340. Fenestron Ord.No. 93/90.

Reference: 49/12

Claw connector, shaft 5 mm

 Claw connector with 5 mm shaftlength of the steel shaft 22 mm

Reference: 510/101

Fenestron (L mechanics) tail drive system

Not available

Reference: 134/608

Pedals EC x2 1:6

dimensions: 5.6 x 4 x 2.55 cmPack of 2

Reference: 134/524

Door handles x4 1:5

dimensions: 2.7 x 2.3 x 0.5 cmPack of 4 (each 2-part)

Reference: 147/56

Patient stretcher

dimensions: 31 x 10 x 3 cm10-part

Reference: 147/601

Air cowls set

dimensions:2.7 x 3 x 1.2 cm3.2 x 2.9 x 1 cm3.9 x 3 x 1.2 cm Pack of 3x 2

Reference: 147/602

Cyclic stick

dimensions: 2.5 x 1.9 x 12 cmPack of 2 (each 2-part)

Reference: 147/605

Air inlet

dimensions: 4.3 x 3.9 x 0.35 cmPack of 2 (l/r)

Reference: 147/610

VOR antenna

dimensions: 9.4 x 2.4, ø 0.4/1.4 cmPack of 2

Reference: 147/611

Tail antenna

dimensions: 4.9 x 0.32 x 0.15 cm

Reference: 147/612

Antenna tail boom

dimensions: ø 0.3-0.65 x 11.9 cm

Reference: 147/615

Quick release latch

dimensions: 2 x 1 x 0.76 cm Pack of 8

Reference: 147/62

Stator

Not available

Reference: 1/16

Pilot Gerald, 300 mm

Pilot Geraldbody height 300 mm weight approx. 164 ggrey overall

Reference: 1/60

Pilot Sebastian, 300 mm

Pilot Sebastianheight : 300 mm

Reference: 995

RC system accessories incl. 5 servos

If you already own a radio control system and then purchase a second model helicopter, the next step is to consider carefully which electronic components are the best choice for the new model.The combination illustrated here comprises accessories which have proved excellent in practice. RC system accessories, with Futaba BLS 452 servos excluding radio...

Reference: 3272

Bavarian Demon 3X (FBL)

Reference: 3274

AXON - Bavarian Demon

Reference: 3206

Receiver battery 2S Lipo 4000 mAh

Reference: 147/35

Eje del rotor 12 x 220 mm

Reference: 404/66

Juego de 4 cuchillas 2000 mm

Reference: 33/4

Rotor bolsa de cuchillas 4 cuchillas Ø 2500 mm

Reference: 70/60-4

Varilla de empuje 2.5 x 60 mm

Reference: 147/29

Cabina H145 T2

Reference: 147/5

Juego de herrajes H145 T2

Reference: 147/616

Torno H145 T2 1: 5