Mil Mi-2 1:6 - Fuselage kit

Reference: 641/35

Rotor shaft 12 x 275 mm

 Rotor shaftfor 2-bladed head

Reference: 26/8

Tank for kerosene 2.5 l

Tank for kerosene, 2500 ml

Reference: 13/32

Kerosene refuelling system

The kerosene refuelling system is sealed with a rubber nipple. The constant low pressure inside the tank draws the nipple firmly against the refuelling opening. That is also the reason why a mechanism such as a spring-controlled valve is not suitable, because the low pressure tends to push the spring back as spring tension diminishes.

Reference: 26/25

Tank vent filter

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Reference: 26/34

Petrol / kerosene hose clamp

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Reference: 703/40

3-blade rotor head for 12 mm, for Lama

Large models require strong, rigid rotor heads which are designed to cope with the demands of a rotor disc of commensurate size, and are built for mounting on a 12 mm Ø rotor shaft. The only...

Reference: 416/3

3-blade-set 2500 mm

Specification 3-blade-set length: 1090 mm rotor disc: 2500 mm blade root: 22 mm 1-hole blade chord: 75 mm profile thickness: 1 mm weight: ca. 500 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Reference: 1002/72

Turbine-mechanics Mil Mi-2 (JetCat SPH5)

This mechanical system has been developed specifically for the Mil Mi-2, so that the model helicopter can be fitted with a JetCat SPH5 turbine system.In contrast to the full-size machine, it is designed for a 2-blade main rotor.The mechanics is supplied in kit-form, i.e. not assembled, excl. electronics

Reference: KEROSTART

Kerosene start for JetCat

Kero Start SystemWorks with a standard 2S LiPo battery.Minimal power requirement of only 50 watts!Backward compatible with all JetCat engines.No change in the wiring necessary.Screw out the glow plug & screw in the kerosene starter system, insert the previous gas valve into the kerosene circle, and you're done!All ECU`s from version 4.00 can be...

Reference: 930/16

Exhaust gas efflux for Mil Mi-2

right / leftThis exhaust system is designed for the Mil Mi-2 with turbine power system.

Reference: 33/3

Rotor blade pouch 3-blade Ø 2500 mm

Reference: 68/50

Swashplate driver 12 mm

 Swashplate driver, metal4 ballracesweigth approx. 25.8 gsuitable for 12 mm Ø main shafts

Reference: 1/16

Pilot Gerald, 300 mm

Pilot Geraldbody height 300 mm weight approx. 164 ggrey overall

Reference: 1/60

Pilot Sebastian, 300 mm

Pilot Sebastianheight : 300 mm

Reference: 995

RC system accessories incl. 5 servos

If you already own a radio control system and then purchase a second model helicopter, the next step is to consider carefully which electronic components are the best choice for the new model.The combination illustrated here comprises accessories which have proved excellent in practice. RC system accessories, with Futaba BLS 452 servos excluding radio...

Reference: 3989

Mil Mi-4/4A Hound illustrated book

The Russian government on October 5, 1950 had signed an order for a helicopter capable of transporting 12 persons or the GAZ-69 jeep. A helicopter of similar conception to the Sikorsky S-55 was designed within one year. This is a 72-page illustrated book concentrating on the Mil Mi-4/4A Hound, containing 276 colour pictures as well as diagrams of the...

Reference: 70/101-3

Gestänge 3,0 x 100 mmOrd.No. 70/101-3