Bell 412 1:6 - Fuselage kit

Reference: 500/13

Toothed belt pulley 17-tooth XL Ø8mm

Not available

Reference: 3304

Motor Set for turbine/electric mechanics

Incl. motor, controller, new machined motor mount Flight time, 12S LiPo, 8 Ah, approx. 12 Minutes, depending on the model weight.For use with Vario Turbine electric mechanics 1002/76, 1002/77 and 1002/78:1002/76: BK 117, Ord.No. 7700; Hughes 500E, Ord.No. 90041002/77: Bo 105, Ord. No. 6005; Airwolf, Ord.No. 2004; Bell 430, Ord.No. 4340, Bell 230, Ord.No....

Reference: 704/38

4-blade rotor head 12 mm

4-blade rotor head 12 mm for 18 mm

Reference: 412/4

4-blade-set 2300 mm

Specification 4-blade-set length: 1015 mm rotor disc: 2300 mm blade root: 18 mm 1-hole blade chord: 65 mm profile thickness: 9 mm weight: ca. 480 g material: CFRP Shark Skin finish: anthracite matt symmetry: reflex l.h.r.

Reference: 060/9

Ball-end bolt 8,0 mm - M 3,5 x 3,0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 206/1

Landing skids for for UH-1D

Not available

Reference: 1002/78

Electric mechanics (turbine PHT3-3)

These mechanics can be used in all fuselages that are designed for the JetCat PHT3-3 or Vario Turbine mechanics Ord.No. 1002/68.You will need to order the Motor pulley gear seperatley to achieve the required rotor rpm....Motor Pulley Ord.No.42 teeth, 850 rpm, 4-blade 2300 mm Ord.No. 500/4144 teeth, 885 rpm, 3-blade 2300 mm Ord.No. 500/4348 teeth, 960 rpm,...

Reference: 414/53

Dome fittings set Bell 412 with PHT3-3 turbine

Not available

Reference: 68/50

Swashplate driver 12 mm

 Swashplate driver, metal4 ballracesweigth approx. 25.8 gsuitable for 12 mm Ø main shafts

Reference: 832/68

Swashplate for main shaft 12 mm

The use of a mechanics with 12 mm Ø main shaft requires a swashplate with an appropriate swivel ballrace.

Reference: 1003/80

2-blade tail rotor ø 6 mm aluminium

Reference: 34/32

Tail rotor blades 156 mm, grey

Tail rotor blade, rotor disc 390 mm ØSpecification 8.0 mm blade root16.5 g approx.45.5 mm blade chordGRP6.7 mm profile thicknesssymmetrical156 mm longbalanced1 pairThe tail rotor blades are designed exclusively for use with the specified VARIO mechanics in conjunction with the tail rotor 1003/80. The maximum rotational speed of the tail rotor shaft is...

Reference: 34/36

Tail rotor blades 180 mm, grey

Tail rotor blade, rotor disc 440 mm ØSpecification 8.0 mm blade root21 g approx.42 mm blade chordGRP5.0 mm profile thicknesssymmetrical180 mm longbalanced1 pair

Reference: 49/12

Claw connector, shaft 5 mm

 Claw connector with 5 mm shaftlength of the steel shaft 22 mm

Reference: 1/16

Pilot Gerald, 300 mm

Pilot Geraldbody height 300 mm weight approx. 164 ggrey overall

Reference: 1/60

Pilot Sebastian, 300 mm

Pilot Sebastianheight : 300 mm

Reference: 995

RC system accessories incl. 5 servos

If you already own a radio control system and then purchase a second model helicopter, the next step is to consider carefully which electronic components are the best choice for the new model.The combination illustrated here comprises accessories which have proved excellent in practice. RC system accessories, with Futaba BLS 452 servos excluding radio...