Brands

No brand

Reference: 10/90

Canopy latch

Review(s): 0

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Price 6.20€
More
On sale upon request

Reference: 060

Ball-end bolt 3.5 mm - M 2.0 x 5.0

Review(s): 0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Price 13.80€
More
In stock
All best sellers

Stainless steel tail drive system for 25 mm

17/75
Rating 
Stainless steel tail rotor drive
  • for 25 mm Ø tail boom
  • with 0.8 mm wall thickness
  • complete as shown
90.30€
Tax included
Quantity
On sale upon request

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description
Stainless steel tail rotor drive
  • for 25 mm Ø tail boom
  • with 0.8 mm wall thickness
  • complete as shown
Product Details
17/75
Reviews

No customer reviews for the moment.

Write your review

Stainless steel tail drive system for 25 mm

Stainless steel tail drive system for 25 mm

Stainless steel tail rotor drive
  • for 25 mm Ø tail boom
  • with 0.8 mm wall thickness
  • complete as shown
Write your review
16 altri prodotti della stessa categoria:

Riferimento: 17/20

Stainless steel tail drive system

Recensioni: 0

This version of the ballraced tail rotor drive system is designed for installation in full-fuselage models. Power is transmitted by a 6 mm stainless steel drive shaft with a length of 980 mm.This length ensures that the system can be used in virtually all our larger fuselages, provided that the main and tail rotors are fitted with the articulated...

Prezzo 93,80 €
Più
In vendita su richiesta

Riferimento: 17/10

Stainless steel tail drive system

Recensioni: 0

When a 2 mm steel drive wire is used between main gearbox and tail gearbox the tail rotor might yaw the heli during acrobatics (e.g. turn), because the wire might "wind up". At this moment a small "wind up" will cause a small change of tail rpm, which requires steering corrections.A so-called "rigid" tail drive system gives a more exact drive to the tail...

Prezzo 73,00 €
Più
In vendita su richiesta

Riferimento: 17

Tail rotor shaft 2 mm

Recensioni: 0

The 2 mm steel tail rotor shaft has proved its worth for several decades, especially in beginners' models.Drive shaft, steel, 2.0 x 980 mm

Prezzo 5,60 €
Più
In vendita su richiesta

Riferimento: 17/7

Articulated centre support

Recensioni: 0

The use of an articulated centre support in helicopters with extreme high mounted tail booms (e.g. Hughes 500) helps to balance up to 30 mm vertical off-set between mechanics and tail rotor. The centre support is double ballraced and pre-assembled.

Prezzo 67,70 €
Più
In vendita su richiesta

Riferimento: 17/13

Articulated joint tail drive system

Recensioni: 0

On a model helicopter like the Hughes 500 e.g. the tail boom is extremely high connected. Therefore an articulated centre support is applied in addition to the articulated tail drive system. The centre support is double ballraced and pre-assembled.Articulated joint tail drive systemwith articulated centre support

Prezzo 138,60 €
Più
In vendita su richiesta

Riferimento: 17/14

Stainless steel tail drive system for 20 mm

Recensioni: 0

Of course the explanation of Ord.No. 17/10 concerning a 2 mm steel drive wire in acrobatics applies not only for fuselages, it is similar for training helicopters.When you convert a trainer you use the existing tail boom. Main gearbox and tail gearbox have to be provided with a claw connector 49/12 each.Models over a certain age should be checked whether...

Prezzo 88,90 €
Più
In vendita su richiesta

Riferimento: 17/16

Stainless steel tube 6.0 x 0.3 x 950 mm

Recensioni: 0

Advanced pilots appreciate the more precise control response of a rigid tail rotor drive system, as provided by a stainless steel drive shaft. Stainless steel tube 6.0 x 0.3 x 950 mm

Prezzo 30,00 €
Più
In vendita su richiesta