Brands

No brand

Reference: 10/90

Canopy latch

Review(s): 0

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Price 6.20€
More
On sale upon request

Reference: 060

Ball-end bolt 3.5 mm - M 2.0 x 5.0

Review(s): 0

These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.

Price 13.80€
More
In stock
All best sellers

Stainless steel tail drive system

17/20
Rating 

This version of the ballraced tail rotor drive system is designed for installation in full-fuselage models. Power is transmitted by a 6 mm stainless steel drive shaft with a length of 980 mm.

This length ensures that the system can be used in virtually all our larger fuselages, provided that the main and tail rotors are fitted with the articulated connections 49/56 and 49/60.

93.80€
Tax included
Quantity
On sale upon request

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

This version of the ballraced tail rotor drive system is designed for installation in full-fuselage models. Power is transmitted by a 6 mm stainless steel drive shaft with a length of 980 mm.

This length ensures that the system can be used in virtually all our larger fuselages, provided that the main and tail rotors are fitted with the articulated connections 49/56 and 49/60.

Product Details
17/20
Reviews

No customer reviews for the moment.

Write your review

Stainless steel tail drive system

Stainless steel tail drive system

This version of the ballraced tail rotor drive system is designed for installation in full-fuselage models. Power is transmitted by a 6 mm stainless steel drive shaft with a length of 980 mm.

This length ensures that the system can be used in virtually all our larger fuselages, provided that the main and tail rotors are fitted with the articulated connections 49/56 and 49/60.

Write your review
16 autres produits dans la même catégorie :

Référence: 800/9

PTFE bush guide for 0.8 mm tailboom

Commentaire(s): 0

PTFE guides in the tail boom provide the necessary "lubrication" for the drive shaft, which eliminates the need to oil the system separately.PTFE guide for 0.8 mm tail boomPack of 3 

Prix 17,20 €
Détails
En vente sur demande

Référence: 17/7

Articulated centre support

Commentaire(s): 0

The use of an articulated centre support in helicopters with extreme high mounted tail booms (e.g. Hughes 500) helps to balance up to 30 mm vertical off-set between mechanics and tail rotor. The centre support is double ballraced and pre-assembled.

Prix 67,70 €
Détails
En vente sur demande

Référence: 17/16

Stainless steel tube 6.0 x 0.3 x 950 mm

Commentaire(s): 0

Advanced pilots appreciate the more precise control response of a rigid tail rotor drive system, as provided by a stainless steel drive shaft. Stainless steel tube 6.0 x 0.3 x 950 mm

Prix 30,00 €
Détails
En vente sur demande

Référence: 17/14

Stainless steel tail drive system for 20 mm

Commentaire(s): 0

Of course the explanation of Ord.No. 17/10 concerning a 2 mm steel drive wire in acrobatics applies not only for fuselages, it is similar for training helicopters.When you convert a trainer you use the existing tail boom. Main gearbox and tail gearbox have to be provided with a claw connector 49/12 each.Models over a certain age should be checked whether...

Prix 88,90 €
Détails
En vente sur demande

Référence: 17/10

Stainless steel tail drive system

Commentaire(s): 0

When a 2 mm steel drive wire is used between main gearbox and tail gearbox the tail rotor might yaw the heli during acrobatics (e.g. turn), because the wire might "wind up". At this moment a small "wind up" will cause a small change of tail rpm, which requires steering corrections.A so-called "rigid" tail drive system gives a more exact drive to the tail...

Prix 73,00 €
Détails
En vente sur demande

Référence: 17/13

Articulated joint tail drive system

Commentaire(s): 0

On a model helicopter like the Hughes 500 e.g. the tail boom is extremely high connected. Therefore an articulated centre support is applied in addition to the articulated tail drive system. The centre support is double ballraced and pre-assembled.Articulated joint tail drive systemwith articulated centre support

Prix 138,60 €
Détails
En vente sur demande