Ball-links Starwood Lama

Reference: 703/87

Double ball-link

Not available

Reference: 107/31

Ball-links 3.0 mm

It is advisable to use stronger pushrods and balls with a larger diameter on demand. This combination often is selected by the pilots with airplanes as well.Ball-link for 3.0 mm pushrodpack of 25connector fits 5.5 mm ��balls

Reference: 107/48

Kugelgelenke für 3,0 mm Gestänge und 4,8er Kugel

Reference: 060/17

Ball-end bolt 13.0 mm - M 3.0 x 9.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/5

Ball-end bolt 20.0 mm - M 3.0 x 7.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/24

Ball-end bolt 10.0 mm - M 3.0 x 9.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/23

Ball-end bolt 5.0 mm - M3.5 x 3.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 107/8

Ball-links 2.0 mm

Ball joints for 2.0 mm thread are only applied at the tail rotor if the one piece control bridge Ord.No 100 is used. Contend of the package: 10 pieces.

Reference: 80/21

Ball retainer set

Ball joints, especially on helicopters that are flown actively by 3-D pilots, are subject to very strong forces. Due to necessary large control movements the ball joints can stretch over a period...

Reference: 060/20

Ball-end bolt 3.0 mm - M 3.5 x 7.5

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/6

Ball-end bolt 4.0 mm - M 3.0 x 3.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/11

Ball-end bolt 9.0 mm - M 2.5 x 6.0

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/15

Ball-end bolt 3.5 mm - M 2.0 x 3.5

In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...

Reference: 060/28

Ball-end bolt 5,0 mm - M 2.0 x 5.0

Not available

Reference: 107/25

Ball-links, 2.5 mm, ballraced

Ballraced joints respond much more readily to the slightest control movement of servos, mixer levers etc. Instead of the ball in the ball-link there is a 2 x 5 x 2.3 mm ballrace, secured with an M 2 socket-head cap screw. These ball-links are designed to fit 2.5 mm diameter pushrods. Select appropriate retaining screws according to the...

Reference: 107/34

Ball-links 3.0 mm

We can supply large ball-links for M3 pushrods separately, for installation in your own projects. The length of the link is 22 mm, and its linkage ball is designed to accept an M3 machine screw. The largest diameter of the link is 13 mm.M3 ball-linkpack of 2