Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Riferimento: 1022/13
This screw-fitting carburettor intake trumpet is designed to improve the flow of air entering the carburettor. Complete with screws and gasket.
Riferimento: 834/38
With the aid of this set the mechanics gets a significant support because it avoids mechanical twisting caused by the engine.We leave it to your own discretion to convert existing petrol mechanics.
Riferimento: 4321
Suppressed plug cap to protect the radio control system from potential interference caused by the ignition system
Riferimento: 1022/1
The ignition spark of a spark plug occurs between two electrodes (multiple agent alloying on nickel base). The spark plug gap varies considerably depending on the application. High-performance spark plug for petrol engine ZG23.
Riferimento: 830/3
If you wish to install an electric on-board starter on a petrol engine, you will need to remove the existing cooling fan and replace it with a different one. The fan can only be removed using a puller.If you don't have the right tool, removing the fan often turns out to be a difficult task.We have designed the fan puller specifically for this purpose, so...
Riferimento: 830/68
Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.
Riferimento: 1022/3
The ignition spark of a spark plug occurs between two electrodes (multiple agent alloying on nickel base). The spark plug gap varies considerably depending on the application.
