

Ninguna marca
Referencia: 34/38
Palas del rotor de cola Juego de 2 palaslongitud = 130 mmancho = 35 mm13 gsimétricopara portacuchillas con portacuchillas de 5 mm (¡no para portacuchillas Vario!), 1 orificio, Ø 3 mmcompatible con NHP
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Riferimento: 830/68
Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.
Riferimento: 1023/5
For the installation of the on-board starter you just remove the pull-cord starter and replace the fan by a modified one.The on-board starter Ord.No. 1023/5 is useful for the petrol engine G230 only.For the previous engine series of ZG 22 and ZG 23 you can use the on-board starter with Ord.No. 1023/6.This on-board electric starter does not fit in the...
Riferimento: 830/67
This additional fan supports the cooling system of the petrol engine and at the same time the air is drawn constantly out of the fuselage.
Riferimento: 1022/13
This screw-fitting carburettor intake trumpet is designed to improve the flow of air entering the carburettor. Complete with screws and gasket.
Riferimento: 1022/3
The ignition spark of a spark plug occurs between two electrodes (multiple agent alloying on nickel base). The spark plug gap varies considerably depending on the application.
Riferimento: 830/3
If you wish to install an electric on-board starter on a petrol engine, you will need to remove the existing cooling fan and replace it with a different one. The fan can only be removed using a puller.If you don't have the right tool, removing the fan often turns out to be a difficult task.We have designed the fan puller specifically for this purpose, so...
Riferimento: 4321
Suppressed plug cap to protect the radio control system from potential interference caused by the ignition system
Riferimento: 1022/1
The ignition spark of a spark plug occurs between two electrodes (multiple agent alloying on nickel base). The spark plug gap varies considerably depending on the application. High-performance spark plug for petrol engine ZG23.