Marcas

Ninguna marca

Referencia: 060

Bulon 3.5 mm - M 2.0 x 5.0

Reseña(s): 0

Estos pernos de punta esférica ofrecen una conexión óptima entre un brazo de salida de servo GRP y la varilla de empuje a la mecánica. Debajo del brazo de salida, bloquea el perno de bola con una tuerca hexagonal M 2. Para brazos de salida de aluminio, utiliza pernos de punta esférica. 060/7 y fluido de bloqueo de hilo.

Precio 13,80 €
Más
En venta bajo pedido
Los productos más vendidos

Soporte lateral

907/47
Valoración 
Bastidor de soporte lateral
26,20 €
Impuestos incluidos
Cantidad
En venta bajo pedido

 

Política de seguridad

 

Política de envío

 

Política de devolución

Descripción
Bastidor de soporte lateral
Detalles del producto
907/47
Reseñas

No hay reseñas de clientes en este momento.

Escriba su propia reseña

Soporte lateral

Soporte lateral

Bastidor de soporte lateral
Escriba su propia reseña
16 autres produits dans la même catégorie :

Référence: 54/14

Clamp ring 12 mm for rotor shaft

Commentaire(s): 0

The clamp ring below the dome plate secures the rotor shaft inside the mechanics. Pay attention to achieve a safe installation, because the complete model is hanging on this clamp ring! Clamp ring for rotor shaft 12 mm Ø

Prix 22,60 €
Détails
En vente sur demande

Référence: 61/20

Bellcrank set 60 degree

Commentaire(s): 0

The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...

Prix 23,10 €
Détails
En vente sur demande

Référence: 107/12

Balls chrome-plated 2.0 x 4.8 mm

Commentaire(s): 0

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces

Prix 15,40 €
Détails
En vente sur demande

Référence: 834/50

Side frame for BENZIN Acrobatic

Commentaire(s): 0

The outstanding features of the BENZIN Acrobatic models are mainly based on these side frames. The engine moved to the front to optimise the CofG.Installation of an on-board electric starter as an option.CCPM - i.e. direct linkage at 4-points / 90 degreeInstallation of the tank below the main rotor shaft, i.e. while the tank runs dry the CofG does not...

Prix 95,40 €
Détails
En vente sur demande

Référence: 36/4

Freewheel washer 5.9 x 11.9 mm

Commentaire(s): 0

The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....

Prix 5,40 €
Détails
En vente sur demande

Référence: 132/38

Fixation pièce II pour transmission

Commentaire(s): 0

These parts are used in a petrol Fenestron mechanical system for mounting the gearbox, where the rotational speed of the tail drive shaft (Ord.No. 134/37) has to be increased. Bracket for speed-up gearboxPack of 2, incl. mounting material

Prix 30,10 €
Détails
En vente sur demande