
Referencia: 92/91
Rodamiento con orejuela de 6 x 10 x 3 mm
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Reference: 44/7
Freewheel hub, 10 mm diameter freewheel
Reference: 908/68
Component part for mechanics Ord.No. 1002/27
Reference: 830/53
Bottom structure for petrol mechanics
Reference: 36/25
A driven tail rotor enables the model to fly backwards, and provides better turning ability during an auto-rotation landing.The parts in this conversion set are used to re-locate the freewheel in the hub of the main drive gear, away from the main rotor shaft. The main rotor now drives the complete main gearbox and therefore also the tail rotor during an...
Reference: 61/20
The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...
Reference: 722/9
The rotor of a model like the Robinson R22 can no longer be slowed down by hand. We can supply an optional rotor brake for mouting below the main gear.The installation can be carried out on an already built set of mechanics (without removing the main rotor shaft). The construction is designed so an accidental activation barely impacts the rotor speed...
Reference: 53/15
Bell cranks/main shaft adaptor for JetCat Turbine, for 2-blade main rotor head
Reference: 53/16
Bell cranks/main shaft adaptor for JetCat Turbine. For 4-blade main rotor head.