![](https://www.vario-helicopter.com/7289-large_default/clamp-ring-15-mm-for-rotor-shaft.jpg)
Referencia: 92/91
Rodamiento con orejuela de 6 x 10 x 3 mm
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Référence: 36/4
The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....
Référence: 412/15
For Bell 412, Ord.No. 4125 when using JetCat PHT2 turbine
Référence: 36/40
Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a...
Référence: 53/15
Bell cranks/main shaft adaptor for JetCat Turbine, for 2-blade main rotor head
Référence: 802/64
32-tooth clutch belldouble ballracedincluding lining
Référence: 105/43
Strut holder, square bar, aluminium Content of the package: 2 piece
Référence: 36/25
A driven tail rotor enables the model to fly backwards, and provides better turning ability during an auto-rotation landing.The parts in this conversion set are used to re-locate the freewheel in the hub of the main drive gear, away from the main rotor shaft. The main rotor now drives the complete main gearbox and therefore also the tail rotor during an...