

Ninguna marca
Referencia: 34/38
Palas del rotor de cola Juego de 2 palaslongitud = 130 mmancho = 35 mm13 gsimétricopara portacuchillas con portacuchillas de 5 mm (¡no para portacuchillas Vario!), 1 orificio, Ø 3 mmcompatible con NHP
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Référence: 36/8
Aluminium freewheel hub incl. 2 one-way bearings 10 mm diameter.
Référence: 54/14
The clamp ring below the dome plate secures the rotor shaft inside the mechanics. Pay attention to achieve a safe installation, because the complete model is hanging on this clamp ring! Clamp ring for rotor shaft 12 mm Ø
Référence: 830/53
Bottom structure for petrol mechanics
Référence: 107/43
Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.
Référence: 907/2
Use this special servo mount for installing the throttle servo on the base plate.
Référence: 603/42
Mechanics support, rear, aluminium Content of the package: 2 piece
Référence: 834/50
The outstanding features of the BENZIN Acrobatic models are mainly based on these side frames. The engine moved to the front to optimise the CofG.Installation of an on-board electric starter as an option.CCPM - i.e. direct linkage at 4-points / 90 degreeInstallation of the tank below the main rotor shaft, i.e. while the tank runs dry the CofG does not...
Référence: 53/6
If you are a fan of scale construction you won't be disappointed in the Alouette II. The model version of the gearbox housing is a reproduction of the full-size machine.The main gearbox dome is fitted in place of the dome plate supplied with the mechanics. The same ballrace is used, i.e. Ord.No. 55/5 - 10 x 21 x 5 mm.The greater size and height of the...