Soporte para botella gas

Référence: 47/11

Spacer 8 x 16 x 5 mm

 Content of the package1 piece

Référence: 808/61

Electric side frame, CFRP

carbon

Référence: 834/54

Plaque de base CFK pour Benzin Acrobatic

Not available

Référence: 834/51

CFK Side frame for Benzin Acrobatic

Not available

Référence: 107/14

Balls chrome-plated 2.5 x 5.5 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces.

Référence: 7/50

Side frame left

Component part for foxy, Ord.No. 7007

Référence: 15/7

Eje intermedio

Référence: 830/53

Bottom structure petrol mechanics

Bottom structure for petrol mechanics

Référence: 830/55

Top gear support GRP

Top gear support GRP.

Référence: 36/40

Reinforced freewheel bell compl.

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a...

Référence: 870/20

Circlip for 8 mm diameter shaft

 Circlip for 8 mm Ø shaftpack of 2

Référence: 830/15

Lay shaft 8 x 191 mm

 Lay shaft8 diameter x 191 mm

Référence: 36/42

Freewheel hub for 36/43

 Content of the package1 piece "with" internal tooth gear

Référence: 61/20

Bellcrank set 60 degree

The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...

Référence: 870/50

Front vertical frame, X-Treme

Not available

Référence: 722/15

Lay shaft 10 x 252 mm

 Lay shaft10 diameter x 252 mm