
Referencia: 92/91
Rodamiento con orejuela de 6 x 10 x 3 mm
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Référence: 53/18
Swashplate/main shaft adaptor for GPH 70 turbine
Référence: 36/40
Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a...
Référence: 54/14
The clamp ring below the dome plate secures the rotor shaft inside the mechanics. Pay attention to achieve a safe installation, because the complete model is hanging on this clamp ring! Clamp ring for rotor shaft 12 mm Ø
Référence: 49/55
This slotted connection shaft holds the loop of the 2 mm tail drive wire. Like all other tail drive systems it is necessary to install "play" (approx. 1 mm) for the wire. Yoke connector5 mm diameter shaft
Référence: 36/25
A driven tail rotor enables the model to fly backwards, and provides better turning ability during an auto-rotation landing.The parts in this conversion set are used to re-locate the freewheel in the hub of the main drive gear, away from the main rotor shaft. The main rotor now drives the complete main gearbox and therefore also the tail rotor during an...
Référence: 260/50
Side frame XLV. The two side frames are identical in size an shape. Content of the package: 1 piece.
Référence: 53/19
Dome fittings set for JetCat PHT3-L turbine
Référence: 830/53
Bottom structure for petrol mechanics