

Ninguna marca
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Reference: 834/100
So you own a Petrol Acrobatic 8304 and would like to install the mechanics in a BO 105?You will need to change the gearbox reduction ratio, and this can be accomplished with this conversion set, which also contains all the other accessory items you require.Petrol Acrobatic conversion set, for converting 8304 mechanics into 1002/40.
Reference: 3311
For the conversion of Xtreme mechanics to electric, for 10 S LiPos (LiPos are not included in the set).Supplied with the drive set are: electric motor, controller, programmer, motor mount, pulley, belt, fixingsDue to constantly changing supply and availability of electric motors, the motor used in this set may vary. Currently, the Pyro 700-52 from...
Reference: 3308/13
Specifications:340 RPM/Vmax. 30,000 RPM6 mm shaft14 poles38.5 mm free shaft length395 g / 13.9 oz2.5 kW32 mΩ Ri
Reference: 3308/15
Specifications:235 RPM/VMax. 25,000 RPM8 mm shaft14 poles55 mm free shaft length575 g / 20.3 oz3.5 kW39 mΩ Ri
Reference: 3307
For the conversion of benzin mechanics to electric
Reference: 3306
Reference: 3312/6
kit content:electric motor Kontronik Pyro 700-45 Lcontroller Kontronik JIVE 100+ LVmotor mounttoothed belt pulley 58 t. / 33 t.mounting materialKontronik TelMe can only be used with controllers Kontronik 120 JIVE Pro and higher.
Reference: 3308/12
Specifications:450 RPM/Vmax. 30,000 RPM6 mm shaft10 poles38.5 mm free shaft length395 g / 13.9 oz2.5 kW32 mΩ Ri
Reference: 3308/9
The TelMe module is the interface between a KOTRONIK ESC with module port and a Futaba receiver prepared for telemetry. TelMe is recognized automatically by the ESC and the correct data stream is started.Generally it's necessary that the transmitter uses FASSTest communication.Be sure that you update your Futaba transmitter, ProgUNIT / ProgDISC and ESC to...