

Ninguna marca
Referencia: 34/38
Palas del rotor de cola Juego de 2 palaslongitud = 130 mmancho = 35 mm13 gsimétricopara portacuchillas con portacuchillas de 5 mm (¡no para portacuchillas Vario!), 1 orificio, Ø 3 mmcompatible con NHP
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Riferimento: 206/26
Kerosene Tank 2.2 l, GRP, with accessories, for UH-1D with Turbine
Riferimento: 3721
Geared pumpfor petrol, kerosene and methanolwith accessories
Riferimento: 830/27
Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...
Riferimento: 3741
Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.
Riferimento: 830/68
Chemical analysis used in Formel 1 is able to determine 1 g of impurity within 1 ton of oil. To fulfill your demand on the cleanness of the fuel for your model helicopter you use the fine-mesh petrol filter inside the fuel tubing between the tank and the carburettor. Also suitable for kerosine turbine fuel.
Riferimento: 26/34
Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...
Riferimento: 830/24
Fuel tank nipple with bend, M5.Content of the package: 2 pieces
Riferimento: 302/26
Fuel tank for Kerosin 1,5 l
Riferimento: 791/26
Kerosene Tank 1.5 l, GRP, with accessories, for Cobra with Turbine