Tanque de queroseno 2.2 l, Turbina UH-1

Reference: 3740

Kerosene fuel station, 10 l.

Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.

Reference: 830/26

Tank 540 ml for petrol

Tank 540 ml, petrol-resistantincluding the requested accessories for installation in a Benzin-Trainer or in a petrol mechanics.The CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel...

Reference: 13/27

Carenado de la válvula de llenado

Reference: 412/26

Fuel tank for Kerosene 2 l for Bell 412

dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)

Reference: 26/7

Tank for kerosene 2.5 l

Tank for kerosene 2500 mlDimensions of bottle: 28.5 x 12 x 8 cm

Reference: 641/26

Tank for Air-Crane, GRP, turbine version

Component part for fuselage Air-Crane, Ord.No. 6410

Reference: 26/32

Schlauchsicherung für Methanol

Reference: 3720

Filling station for petrol 3 l capacity

This refuelling station for petrol helicopters consists of a petrol-proof container of 3 litres capacity, a hand-pump for filling and emptying, fittings and filler hose.

Reference: 834/26

Tank 540 ccm für Benzin

Reference: 26/50

Kevlartank for Kerosene 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside. These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop. They fit in every fuselage, that would normally use the plastic tank Ord.No. 26/5 for. For example, this Aramid tank is...

Reference: 3741

Separate pump holder and hand wind pump

Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.

Reference: 140/26

Kerosintank AW 139

Not available

Reference: 26/25

Tank vent filter

Tank vent filter, to prevent dirt and other foreign objects from entering fuel supply.

Reference: 830/83

Petrol fuel tubing 1 m

Fuel tubing for petrolapprox. 1 mtransparentFuel tubing inevitably suffers from the effects of ageing. Always replace brittle tubing before it gives problems! 

Reference: 26/34

Petrol / kerosene hose clamp

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Reference: 10/82-10

Schlauch für Methanol 10 mOrd.No. 10/82-10