Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
Dimensiones: 7.17 x 3 x 2.67 cm
3 partes
No hay reseñas de clientes en este momento.
Riferimento: 31/34
Incl. programmatore per il nuovo controller del motore lavorato volo mount tempo, Lipo 12S, 5 Ah, ca. 12 minuti, a seconda del pesodel modello.Per l'uso con la...
Riferimento: 330/36
If you don't want that the doors of the Lama canopy close itself after opening, you use these magnet latches.
Riferimento: 340/2
The suckering ducts are on the model exactly on the same place as the original ones in position to the turbine on the full-size helicopter.
Riferimento: 341/413
dimensions: 10.63 x 0.7 x 1.3 cmPack of 2, each 2-part
Riferimento: 341/402
dimensions: 4.3 x 2.5 cm, inner diameter: 1.43 cm
Riferimento: 350/17
When the turbine of a full-size helicopter is not running, the engine is protected with an exhaust cover which prevents foreign objects finding their way inside the turbine. This exhaust cover for model turbines is suitable for the Lama, Alouette III and any other machine with a 90 mm Ø exhaust pipe. Caution: it is essential to allow the exhaust pipes to...
Riferimento: 1/21
As you would expect, we can also supply the matching type of GRP helmet for William the Pilot; it is simply pushed into place on his head. If you wish to fit a radio headpiece, you now have plenty of scope for your imagination: a piece of foam rubber, a thin wire mount and a coiled cable are all you need to make this accessory, and the pilot will...
Riferimento: 341/36
Load basket for Lamalength:410 mmwidth:100 mmheight70 mm
Riferimento: 340/6
If you have a mind to continue adding detail fittings to your Lama, you are sure to appreciate this landing gear step which can be fitted to an existing model at any time. The step is made of stainless steel, and is supplied complete with clips, screw fittings and tread material. Entry step, for Lama, pack of 1
