Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
En nuestra gama de productos, ofrecemos pernos de extremo de bola de acero cromado duro con una excelente calidad de superficie y con diferentes tamaños de bola, pero los que se utilizan principalmente son aquellos con un diámetro de 4,8 mm.
Antes de ordenar, verifique que haya seleccionado el perno de bola correcto. ¡Mida la bola, el diámetro y la longitud del hilo para estar en el lado seguro!
La longitud de un perno de punta de bola se refiere a la medida desde el centro de la bola hasta el comienzo del hilo. La medida del hilo se muestra por separado.
Política de seguridad
Política de envío
Política de devolución
Bola de fin de perno de 3,5 mm - M 2,5 x
No hay reseñas de clientes en este momento.
Reference: 060/29
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Reference: 107/15
It is advisable to use stronger pushrods and balls with a larger diameter on demand. This combination often is selected by the pilots with airplanes as well.Ball-link for 3.0 mm pushrodpack of 10connector fits 5.5 mm ��balls
Reference: 060/19
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Reference: 060/1
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Reference: 060/5
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Reference: 107/8
Ball joints for 2.0 mm thread are only applied at the tail rotor if the one piece control bridge Ord.No 100 is used. Contend of the package: 10 pieces.
Reference: 060/12
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Reference: 060/11
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Reference: 107/9
Ball-links must be flexible but adequately rigid. The threaded part of the rod cuts its own thread in the ball-link, and no further fixing is necessary. Use silicone oil, Order No. 10/37, for maintenance.Pack of 10Connector fits 4.8 mm ��ballsHow do you know when the pushrod meets the end of the socket, and does it becomes screwed to far into the...
Reference: 060/2
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Reference: 80/21
Ball joints, especially on helicopters that are flown actively by 3-D pilots, are subject to very strong forces. Due to necessary large control movements the ball joints can stretch over a period...
Reference: 060/20
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
En nuestra gama de productos, ofrecemos pernos de extremo de bola de acero cromado duro con una excelente calidad de superficie y con diferentes tamaños de bola, pero los que se utilizan principalmente son aquellos con un diámetro de 4,8 mm.
Antes de ordenar, verifique que haya seleccionado el perno de bola correcto. ¡Mida la bola, el diámetro y la longitud del hilo para estar en el lado seguro!
La longitud de un perno de punta de bola se refiere a la medida desde el centro de la bola hasta el comienzo del hilo. La medida del hilo se muestra por separado.
