Ninguna marca
Referencia: 92/91
Brida rodamientos autolubricantes 6 x 10 x 3 mm
Política de seguridad
Política de envío
Política de devolución
No hay reseñas de clientes en este momento.
Référence: 060/8
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Référence: 107/9
Ball-links must be flexible but adequately rigid. The threaded part of the rod cuts its own thread in the ball-link, and no further fixing is necessary. Use silicone oil, Order No. 10/37, for maintenance.Pack of 10Connector fits 4.8 mm ��ballsHow do you know when the pushrod meets the end of the socket, and does it becomes screwed to far into the...
Référence: 060
These ball-end bolts offer an optimal connection between a GRP servo output arm and the pushrod to the mechanics. Underneath the output arm you lock the ball-end bolt with an M 2 hexagon nut. For aluminium output arms you use ball-end bolts Ord.No. 060/7 and thread-lock fluid.
Référence: 80/21
Les chapes à boules sont très sollicitées, notamment lors des débattements importants tel qu'on les trouve sur les hélicoptères en vol 3-D. Elles s'élargissent avec le temps. Une...
Référence: 107/8
Ball joints for 2.0 mm thread are only applied at the tail rotor if the one piece control bridge Ord.No 100 is used. Contend of the package: 10 pieces.
Référence: 060/17
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Référence: 060/23
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Référence: 107/31
It is advisable to use stronger pushrods and balls with a larger diameter on demand. This combination often is selected by the pilots with airplanes as well.Ball-link for 3.0 mm pushrodpack of 25connector fits 5.5 mm ��balls
Référence: 060/11
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Référence: 060/10
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Référence: 060/3
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Référence: 060/30
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
Référence: 107/25
Ballraced joints respond much more readily to the slightest control movement of servos, mixer levers etc. Instead of the ball in the ball-link there is a 2 x 5 x 2.3 mm ballrace, secured with an M 2 socket-head cap screw. These ball-links are designed to fit 2.5 mm diameter pushrods. Select appropriate retaining screws according to the...
Référence: 060/4
In our range of products we provide ball-end bolts made of hard-chromed steel with an excellent surface quality, and with different ball sizes, but mainly used are those with a diameter of 4.8 mm. Please check before you order that you have selected the correct ball-end bolt. Measure the ball, the diameter and the length of the thread to be on the safe...
