Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 62 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 13-24 de 62 article(s)

Filtres actifs

  • Catégories : Motores O.S.
  • Catégories : Tuyéres pour turbine
  • Catégories : joints et accessoires
Swashplate guide Aperçu rapide

Référence: 52/20

Swashplate guide

Commentaire(s): 0

The swashplate guide prevents the outer ring of the swashplate rotating; the swashplate pin runs in the slot in this guide. The part is fixed to the dome plate using M 3 socket-head cap screws. The length of the swashplate guide slot allows generous collective pitch travels to be exploited to the full; its position on the rotor shaft can be adjusted to...

Prix 14,70 €
Détails
En vente sur demande
Exhaust for Bell 212 Twin Jet Aperçu rapide

Référence: 214/16

Exhaust for Bell 212 Twin Jet

Commentaire(s): 0

Exhaust tubes for turbines are always designed for the specified model. It is important that no forward thrust emerges from the system. Should this still occur, the forward thrust produced is minimal.Turbine exhaust tubes are designed as exhaust-gas diffusers, i.e. opens wider towards the rear.

Prix 552,50 €
Détails
En vente sur demande
3-D swashplate 10 mm Aperçu rapide

Référence: 68/14

3-D swashplate 10 mm

Commentaire(s): 0

This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.

Prix 108,30 €
Détails
En vente sur demande
Swashplate 5-blade Aperçu rapide

Référence: 68/15

Swashplate 5-blade

Commentaire(s): 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with...

Prix 131,70 €
Détails
En vente sur demande
Exhaust for XL-C Aperçu rapide

Référence: 268/16

Exhaust for XL-C

Commentaire(s): 0

Exhaust tubes for turbines are always designed for the specified model. It is important that no forward thrust emerges from the system. Should this still occur, the forward thrust produced is minimal.Turbine exhaust tubes are designed as exhaust-gas diffusers, i.e. opens wider towards the rear.

Prix 254,50 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook