Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 166 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 25-36 de 166 article(s)

Filtres actifs

  • Catégories : Axes de rotor
  • Catégories : Motores O.S.
  • Catégories : Réservoirs
  • Catégories : Tuyéres pour turbine
Kevlartank para Queroseno... Aperçu rapide

Référence: 26/60

Kevlartank para Queroseno 1.4 l

Commentaire(s): 0

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.When ordering, one tank is supplied.When mounting the lid, please fix the screws cross-wise using blue loctite until you have...

Prix 388,60 €
Détails
En vente sur demande
Exhaust for Bell 212 Twin Jet Aperçu rapide

Référence: 214/16

Exhaust for Bell 212 Twin Jet

Commentaire(s): 0

Exhaust tubes for turbines are always designed for the specified model. It is important that no forward thrust emerges from the system. Should this still occur, the forward thrust produced is minimal.Turbine exhaust tubes are designed as exhaust-gas diffusers, i.e. opens wider towards the rear.

Prix 552,50 €
Détails
En vente sur demande
Réservoir en Kevlar 2.8 l... Aperçu rapide

Référence: 26/70

Réservoir en Kevlar 2.8 l pour Kérosène et pétrole

Commentaire(s): 0

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all tested with air pressure on leaks to make sure that they are 100% leak-proof, when they arrive at your workshop. They fit in the Vario turbine Ecureuil fuselage, that we recommend the plastic tank Ord.No. 26/7 for.When...

Prix 388,60 €
Détails
En vente sur demande
3-D swashplate 10 mm Aperçu rapide

Référence: 68/14

3-D swashplate 10 mm

Commentaire(s): 0

This swashplate provides longer ball-end bolts on the inner ring for larger control travels, as required for 3-D flying.

Prix 108,30 €
Détails
En vente sur demande
Station de carburant,... Aperçu rapide

Référence: 3740

Station de carburant, kérosène 10 l

Commentaire(s): 0

Any turbine-powered model has to carry a very large quantity of fuel, and this in turn calls for a fuel station of ample volume.The VARIO filler station has a capacity of 10 litres and is ideal for flying sessions.The fueltank is filled and drained using a practical geared pump, which is permanently mounted on the fuel container.

Prix 108,30 €
Détails
En vente sur demande
Swashplate 5-blade Aperçu rapide

Référence: 68/15

Swashplate 5-blade

Commentaire(s): 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with...

Prix 131,70 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook