Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Il y a 106 produits.

Trier par :
Pertinence Nom, A à Z Nom, Z à A Prix, croissant Prix, décroissant
Affichage 25-36 de 106 article(s)

Filtres actifs

  • Catégories : Axes de rotor
  • Catégories : Motores O.S.
  • Catégories : Tuyéres pour turbine
Swashplate 5-blade Aperçu rapide

Référence: 68/15

Swashplate 5-blade

Commentaire(s): 0

The swashplate disc can be controlled by 4 ball-end bolts at 90° or by 3 ball-end bolts at 120°, whether the linkage is direct to the servos or utilises bellcranks. As standard there are 4 linkage points.In both types the swashplate bolt assumes the additional function of one linkage point. For a 120° linkage the ball-end bolts have to be replaced with...

Prix 131,70 €
Détails
En vente sur demande
Swashplate driver 10 mm Aperçu rapide

Référence: 68/20

Swashplate driver 10 mm

Commentaire(s): 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prix 87,20 €
Détails
En vente sur demande
Exhaust for XL-C Aperçu rapide

Référence: 268/16

Exhaust for XL-C

Commentaire(s): 0

Exhaust tubes for turbines are always designed for the specified model. It is important that no forward thrust emerges from the system. Should this still occur, the forward thrust produced is minimal.Turbine exhaust tubes are designed as exhaust-gas diffusers, i.e. opens wider towards the rear.

Prix 254,50 €
Détails
En vente sur demande
Swashplate driver for rotor... Aperçu rapide

Référence: 68/20-5

Swashplate driver for rotor head 705/30

Commentaire(s): 0

Where a pitch compensator sits and two pushrods connect to the flybar, this is now a swashplate driver in its place.This is necessary to drive the inner ring of the swashplate in order to always control the blade angle in the same position.Aluminium swashplate driver with 4 ballraces.

Prix 87,20 €
Détails
En vente sur demande
Retour en haut

Suivez-nous sur Facebook

Facebook