Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes
Accessoires

Accessoires

Accessoires

Il y a 11 produits.

Affichage 1-11 de 11 article(s)

Filtres actifs

Référence: 74

O-ring 3 x 8 mm hard

Commentaire(s): 0

O-ring 3 x 8 mm hard Content of the package: 4 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 5,40 €
Détails
En vente sur demande

Référence: 33/20

Rotor blade support

Commentaire(s): 0

An easy solution to the transport problem: This rotor blade support fits all helicopter trainers with 20 mm O.D. tail booms.Rotor blade supportfor rotor blades up to 65 mm chord

Prix 14,70 €
Détails
En vente sur demande

Référence: 33/25

Porte pales pour transport

Commentaire(s): 0

La bonne solution pour le transport: La découpe du grand support convient aux différentes formes des poutres sur les fuselages.Support de transportpour fuselages, 30 x 270 x 200 mm

Prix 30,60 €
Détails
En vente sur demande

Référence: 33/22

Rotor blade support

Commentaire(s): 0

If you do not wish to remove the rotor blades temporarily for transport, they can be protected effectively in this strong support, which is mounted above the tail boom.The height of the support, the width of the blade openings and the diameter of the tail boom are the crucial factors when buying a blade support.This support is ideal for pod-and-boom...

Prix 17,00 €
Détails
En vente sur demande

Référence: 33/28

Rotor blade tie-down

Commentaire(s): 0

Rotor blade tie-downs are an essential feature of full-size helicopter life. The tie-down protects the blades from swinging, rocking and stretching, and thereby prevents excessive pressure on the rotor shaft. If these measures were not taken the result could easily be in-flight mechanical failure; rotor blades spinning as the wind rises could strike...

Prix 30,60 €
Détails
En vente sur demande

Référence: 33/27

Rotor blade tie-down large

Commentaire(s): 0

The rotor blade harness ranks as an essential accessory for full-size helicopters. These items prevent the blades swinging or rocking, and thereby exerting pressure on the rotor shaft. If that were to be allowed, in-flight failures could be attributed to it.Rotor blades set in motion by rising winds could also be damaged by striking obstacles. The rotor...

Prix 37,50 €
Détails
En vente sur demande

Suivez-nous sur Facebook