Accueil
Marques

No brand

Meilleures Ventes
Tail rotor blades 130 mm Aperçu rapide

Référence: 34/30

Tail rotor blades 130 mm

Commentaire(s): 0

Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair

Prix 65,70 €
Détails
En vente sur demande
Canopy latch Aperçu rapide

Référence: 10/90

Canopy latch

Commentaire(s): 0

The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...

Prix 7,30 €
Détails
En vente sur demande
Toutes les meilleures ventes

Pièce centrale tête rotor

72/10
Note 




Rotor head centre piece for 2-bladed rotor head.

28,10 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description




Rotor head centre piece for 2-bladed rotor head.

Détails du produit
72/10
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Pièce centrale tête rotor

Pièce centrale tête rotor




Rotor head centre piece for 2-bladed rotor head.

Donnez votre avis
16 autres produits dans la même catégorie :
GRP blade holder, 5 mm ∅ hole Aperçu rapide

Référence: 76/19

GRP blade holder, 5 mm ∅ hole

Commentaire(s): 0

As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with short linkage armfor multi-blade rotor heads

Prix 26,60 €
Détails
En vente sur demande
Rotor cap for Multi blade head Aperçu rapide

Référence: 707

Rotor cap for Multi blade head

Commentaire(s): 0

The diameter is 83 mm and the construction height from the screw-on surface to the highest point is 13 mm.It is fastened using an M4 x 14 hexagon socket screw (included).

Prix 26,60 €
Détails
En vente sur demande
Joint torique 5 x 9 mm Aperçu rapide

Référence: 832/47

Joint torique 5 x 9 mm

Commentaire(s): 0

O-ring 5 x 9 mm Content of the package: 2 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 6,60 €
Détails
En vente sur demande
Bearing pin Aperçu rapide

Référence: 68/19

Bearing pin

Commentaire(s): 0

Bearing pin for swashplate driver 68/20. Content of the package: 1 piece.

Prix 9,70 €
Détails
En vente sur demande
O-ring 2 x 6 mm soft Aperçu rapide

Référence: 74/6

O-ring 2 x 6 mm soft

Commentaire(s): 0

O-ring 2 x 6 mm soft Content of the package: 8 piecesTip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 5,50 €
Détails
En vente sur demande
Conversion set for Delta head Aperçu rapide

Référence: 1005/6

Conversion set for Delta head

Commentaire(s): 0

In the world of full-size helicopters the Delta effect is universally acknowledged. For model helicopter rotors we have emulated the effect as closely as possible.As soon as a rotor blade is pushed out of its path by some external influence (thermal, down draught etc.) the opposite blade counters the movement and thereby subdues the rotor disc.Conversion...

Prix 153,40 €
Détails
En vente sur demande
GRP blade holder, 5 mm ∅ hole Aperçu rapide

Référence: 76/16

GRP blade holder, 5 mm ∅ hole

Commentaire(s): 0

As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with long linkage armfor two-blade rotor heads

Prix 26,60 €
Détails
En vente sur demande
Clamp ring pitch... Aperçu rapide

Référence: 54/16

Clamp ring pitch compensator 17 mm

Commentaire(s): 0

The 17 mm Ø clamp ring is fitted to the rotor head centre piece, the steel pin slides in the guide slot of the pitch compensator. Rotate the clamp for fine adjustment so that your helicopter flies straight when you apply a pitch-axis command.Clamp ring for pitch compensator 17 mm Ø, length of the pin 30 mm.

Prix 23,80 €
Détails
En vente sur demande
Ball collet 4 mm, short Aperçu rapide

Référence: 86/5

Ball collet 4 mm, short

Commentaire(s): 0

Ball collets provide the fixation of double ball-links on the flybar, in order to settle the essential distance to the rocker. Ball collet 4 mm Ø, overall length 19.7 mm, pack of 2, chrome-plated.

Prix 9,70 €
Détails
En vente sur demande
O-ring 3 x 12 mm hard Aperçu rapide

Référence: 74/12

O-ring 3 x 12 mm hard

Commentaire(s): 0

O-ring 3 x 12 mm hard Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 5,50 €
Détails
En vente sur demande