

No brand
Référence: 2017 E
Référence: 34/30
Tail rotor bladesSpecification 8.0 mm blade root8.7 g approx.29 mm blade chord5.0 mm profile thicknesssymmetrical130 mm longbalanced1 pair
Référence: 10/90
The canopy retainer set helps to keep your canopies undamaged for a long period. It absorbs movement, such as abrupt shocks in hard landings, and prevents cracks developing in the canopy.Knurled nuts are used to hold the canopy in place, and they do not intent the canopy when tightened.The components of the canopy retainer system are screwed against...
Rocker, GRP, for rotor head 702/70, alone
Política de seguridad
Política de envío
Política de devolución
Rocker, GRP, for rotor head 702/70, alone
Aucun avis n'a été publié pour le moment.
Reference: 703/45
This rotor head linkage is essential for the correct operation of the rotor head of the Alouette III due to its heavy take-off weight.
Reference: 79/8
Inertia weights are small "extra brakes". They increase the gyroscopic stability of the flybar and slow down the rotor head's response. For every beginner we recommend these so the responsiveness of the rotor head is reduced. The rotor head becomes more responsive as the inertia weights are moveded inwards (always place equally!). Inertia weights suitable...
Reference: 76/9
Blade holder arm, aluminium. Content of the package: 1 piece.
Reference: 85/1
Spacer 4 x 6 x 1.5 mm, brass Content of the package: 2 pieces
Reference: 73/20
Thrust bearing shaft "tubular"27.8 g, 8 mm Ø, 101 mm longonly for Electro rotor head and in use with the model helicopter Silence!
Reference: 82/54
Stabilizer rods 4 x 120 mm Content of the package: 2 pieces
Reference: 72/3
When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments.Please note: stay in safe distance away from the turning...
Reference: 71/56
Pitch mixer centre piece, aluminium, 12 mm Ø
Reference: 10/81
Silicone sleeve5 x 7 x 100 mmtransparent
Reference: 703/31
Item to a multi-blade rotor head for Ø 10 mm shaft; see Ord.No. 703/30, 704/30 and 705/30.
Reference: 74/21
O-ring 3.5 x 12 mm hard Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.
Reference: 832/77
Spacer washer for rotor headContent of the package: 2 pieces
Reference: 79/21
The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.
Reference: 74/7
Flybarless electronics have now become common. Where they are being used harder damping is required.For these cases Vario is now offering a harder damping of the blade shaft provided by a pretension absorbing element in the centre block.For the adjustment, the outer O-ring position can be selected between "hard" and "soft" flight characteristics.Important...
Reference: 76/18
Component part for a multi-blade rotor head for 10 mm or 12 mm Ø main shaft.
Rocker, GRP, for rotor head 702/70, alone