Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Bras de commande en métal, 5 mm

80/30
Note 


Control bridge 2-part metal, for 5 mm ∅ flybar.
34,30 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description


Control bridge 2-part metal, for 5 mm ∅ flybar.
Détails du produit
80/30
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Bras de commande en métal, 5 mm

Bras de commande en métal, 5 mm



Control bridge 2-part metal, for 5 mm ∅ flybar.
Donnez votre avis
16 autres produits dans la même catégorie :
O-ring 3 x 16 mm soft Aperçu rapide

Référence: 74/14

O-ring 3 x 16 mm soft

Commentaire(s): 0

O-ring 3 x 16 mm soft Content of the package: 8 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 6,30 €
Détails
En vente sur demande
Flybar stainless steel 5 x... Aperçu rapide

Référence: 79/25

Flybar stainless steel 5 x 530 mm

Commentaire(s): 0

The length of the flybar itself also plays an important role in the model's flight characteristics: the longer the flybar, the smoother the hover. A longer flybar increases the control deflections. 450 mm length is considered normal, while 510 mm provides more docile handling.

Prix 21,80 €
Détails
En vente sur demande
Joint torique 5 x 9 mm Aperçu rapide

Référence: 832/47

Joint torique 5 x 9 mm

Commentaire(s): 0

O-ring 5 x 9 mm Content of the package: 2 pieces Tip: O-rings always slide with a drop of silicone oil onto the shaft.

Prix 7,60 €
Détails
En vente sur demande
GRP blade holder, 5 mm ∅ hole Aperçu rapide

Référence: 76/16

GRP blade holder, 5 mm ∅ hole

Commentaire(s): 0

As demands on helicopters continue to rise, so stronger blade holders are required. In this case a 14 mm blade holder is combined with a 5 mm Ø hole for blade retention, i.e. the matching blade holder screws and self-locking nuts are M5 in size.GRP blade holder with long linkage armfor two-blade rotor heads

Prix 30,60 €
Détails
En vente sur demande
Kit mélangeurs Aperçu rapide

Référence: 78/40

Kit mélangeurs

Commentaire(s): 0

Mixer levers are an essential part of every flybar-controlled rotor head. From the swashplate a pushrod runs to the ballraced mixer arm which is screwed to the blade holder arm. The mixer levers transmit the control movement to the flybar via the double ball-link.Additionial accessories for the use of mixer levers are either two flanged ballraces or two...

Prix 37,50 €
Détails
En vente sur demande
Frein rotor en CFK Aperçu rapide

Référence: 72/1

Frein rotor en CFK

Commentaire(s): 0

When you have landed and stopped the engine, the rotor head continues spinning for quite some time until it stops by itself. A rotor brake shortens the time you have to wait. Using light pressure with the flat of your hand on the domed face of the rotor brake you can stop the rotor in a few moments. Pease note: stay in safe distance away from the turning...

Prix 50,50 €
Détails
En vente sur demande

Suivez-nous sur Facebook

Facebook