Marques

No brand

Fournisseurs

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Douille 10 x 14 x 2,5 mm

36/11
Note 

The freewheel hubs are sealed on both sides by brass rings; the rings can also be replaced when necessary (i.e. when the freewheel bearings are replaced).

Pack of 2

11,20 €
TTC
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

The freewheel hubs are sealed on both sides by brass rings; the rings can also be replaced when necessary (i.e. when the freewheel bearings are replaced).

Pack of 2

Détails du produit
36/11
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Douille 10 x 14 x 2,5 mm

Douille 10 x 14 x 2,5 mm

The freewheel hubs are sealed on both sides by brass rings; the rings can also be replaced when necessary (i.e. when the freewheel bearings are replaced).

Pack of 2

Donnez votre avis
16 autres produits dans la même catégorie :

Référence: 53

Dome plate GRP

Commentaire(s): 0

At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.

Prix 17,00 €
Détails
En vente sur demande

Référence: 132/37

Fixation pièce I pour transmission

Commentaire(s): 0

These parts are used in a petrol Fenestron mechanical system for mounting the gearbox, where the rotational speed of the tail drive shaft has to be increased.Pack of 2

Prix 32,30 €
Détails
En vente sur demande

Référence: 36/4

Freewheel washer 5.9 x 11.9 mm

Commentaire(s): 0

The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....

Prix 7,60 €
Détails
En vente sur demande

Suivez-nous sur Facebook