Marques

No brand

Référence: 97/4

Servo linkage set

Commentaire(s): 0

When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...

Prix 40,10 €
Détails
En vente sur demande
Toutes les meilleures ventes

Balls chrome-plated 2.0 x 4.8 mm

107/12
Note 



Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.
Content of the package: 25 pieces

19,90 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description



Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.
Content of the package: 25 pieces

Détails du produit
107/12
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Balls chrome-plated 2.0 x 4.8 mm

Balls chrome-plated 2.0 x 4.8 mm



Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.
Content of the package: 25 pieces

Donnez votre avis
16 other products in the same category:

Reference: 53

Dome plate GRP

Review(s): 0

At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.

Price 14.80€
More
On sale upon request

Reference: 54/9

Clamp ring 10 mm diameter rotor shaft

Review(s): 0

Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted. The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.Clamp ring for rotor shaft, 10 mm diameter

Price 23.80€
More
On sale upon request