CFK Side frame for Benzin Acrobatic

Référence: 61/20

Bellcrank set 60 degree

The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...

Référence: 945/53

Dome fittings set 5-blade Logo 800

Not available

Référence: 15/7

Eje intermedio

Référence: 107/14

Balls chrome-plated 2.5 x 5.5 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces.

Référence: 722/38

Motor mount

Motor mount

Référence: 49/8

Cruciform element

Content of the package: 1 piece

Référence: 64/69

Washer for crankshaft screw

 Content of the package1 piece

Référence: 54/9

Clamp ring 10 mm diameter rotor shaft

Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted. The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.Clamp ring for rotor shaft, 10 mm diameter

Référence: 103/25

Douille 3,1 x 8 x 17,2 mm

Pack of 2

Référence: 722/49

Tube drive adapter for shaft 8 mm

Content of the package: 1 piece

Référence: 105/53

Mechanics support plate

Mechanics support plate, aluminium Content of the package: 1 piece

Référence: 132/38

Fixation pièce II pour transmission

These parts are used in a petrol Fenestron mechanical system for mounting the gearbox, where the rotational speed of the tail drive shaft (Ord.No. 134/37) has to be increased. Bracket for speed-up gearboxPack of 2, incl. mounting material

Référence: 47/11

Spacer 8 x 16 x 5 mm

 Content of the package1 piece

Référence: 107/12

Balls chrome-plated 2.0 x 4.8 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces

Référence: 257/53

Dome fittings set 2-blade T-Rex UH-1D / Bell 212

Not available

Référence: 53/15

Dome fittings set for PHT3

Bell cranks/main shaft adaptor for JetCat Turbine, for 2-blade main rotor head