

No brand
Référence: 2017 E
Référence: 97/4
When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...
Content of the package: 1 piece
Política de seguridad
Política de envío
Política de devolución
Content of the package: 1 piece
Aucun avis n'a été publié pour le moment.
Référence: 470/53
Bottom structure Bell 47 G III mechanics.
Référence: 36/11
The freewheel hubs are sealed on both sides by brass rings; the rings can also be replaced when necessary (i.e. when the freewheel bearings are replaced).Pack of 2
Référence: 107/43
Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.
Référence: 871/37
Content of the package1 piece
Référence: 105/43
Strut holder, square bar, aluminium Content of the package: 2 piece
Référence: 870/200
For the conversion of a L.H. X-Treme trainer into a R.H. mechanics needed parts are assembled in this set. This set contains all the parts required for the conversion of a L.H. X-Treme trainer into R.H. mechanics.
Référence: 53/16
Bell cranks/main shaft adaptor for JetCat Turbine. For 4-blade main rotor head.
Référence: 834/55
CFK side frames and base plate for Acrobatic
Référence: 132/38
These parts are used in a petrol Fenestron mechanical system for mounting the gearbox, where the rotational speed of the tail drive shaft (Ord.No. 134/37) has to be increased. Bracket for speed-up gearboxPack of 2, incl. mounting material
Content of the package: 1 piece