Mechanics spacer

Référence: 107/44

Balls chrome-plated 2.5 x 5.5 mm

Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 10 pieces.

Référence: 860/25

Douille 3,1 x 8 x 11,1 mm

Pack of 2

Référence: 907/47

Raccord d'étanchéité

Component part for mechanics Ord.No. 1002/27

Référence: 257/53

Dome fittings set 2-blade T-Rex UH-1D / Bell 212

Not available

Référence: 603/42

Mechanics support, rear

Mechanics support, rear, aluminium Content of the package: 2 piece

Référence: 140/53

Dome fittings set Agusta 139 Turbine

Not available

Référence: 907/49

Douille 3,1 x 8 x 10 mm

Pack of 2

Référence: 15/7

Eje intermedio

Référence: 260/53

Plancher pour mécanique XLV

Base plate XLV.

Référence: 722/9

Rotor brake

The rotor of a model like the Robinson R22 can no longer be slowed down by hand. We can supply an optional rotor brake for mouting below the main gear.The installation can be carried out on an already built set of mechanics (without removing the main rotor shaft). The construction is designed so an accidental activation barely impacts the rotor speed...

Référence: 57/2

Douille 3,1 x 10 x 4 mm

Pack of 2

Référence: 603/41

Mechanics support, front

Mechanics support, front, aluminium Content of the package: 2 piece

Référence: 94/11

Bush 5 x 8 x 2.5 mm

Pack of 2

Référence: 36/4

Freewheel washer 5.9 x 11.9 mm

The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....

Référence: 54/9

Clamp ring 10 mm diameter rotor shaft

Below the dome plate you install the clamp ring with the socket on top if no thrust bearing is mounted. The socket supports the clamp ring against the inner ring of the ballrace - otherwise the clamp ring would grind on the outer ring, and affect the function of the ballrace.Clamp ring for rotor shaft, 10 mm diameter

Référence: 945/54

Dome fittings set 4-blade Logo 800

Not available