Accueil
Marques

No brand

Fournisseurs
Meilleures Ventes
Flanged ballrace 6 x 10 x 3 mm Aperçu rapide

Référence: 92/91

Flanged ballrace 6 x 10 x 3 mm

Commentaire(s): 0

Ballraces are used wherever moving parts are required to run with a minimum of play and a minimum of friction. The more ballraces are used, the more smoothly the mechanics of a helicopter works, and the lower the rate of wear. The dimensions of a ballrace mean: inside diameter (I.D.) x outside diameter (O.D.) x thickness. For flanged bearings the same...

Prix 14,70 €
Détails
En vente sur demande
Toutes les meilleures ventes

Reinforced freewheel bell compl.

36/40
Note 

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.
Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a mechanical system for a full-fuselage model. To extend the load limits further you can use this freewheel and/or this hub (if you want a driven tail rotor for auto-rotation). However, both must only be used in conjunction with the pinion shaft 41/25. The outside diameter is 59 mm in both cases.
Freewheel bell, reinforced, with two 10 mm diameter freewheel bearings and GRP internal-tooth gear.

131,70 €
Quantité
En vente sur demande

 

Política de seguridad

 

Política de envío

 

Política de devolución

Description

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.
Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a mechanical system for a full-fuselage model. To extend the load limits further you can use this freewheel and/or this hub (if you want a driven tail rotor for auto-rotation). However, both must only be used in conjunction with the pinion shaft 41/25. The outside diameter is 59 mm in both cases.
Freewheel bell, reinforced, with two 10 mm diameter freewheel bearings and GRP internal-tooth gear.

Détails du produit
36/40
Avis

Aucun avis n'a été publié pour le moment.

Donnez votre avis

Reinforced freewheel bell compl.

Reinforced freewheel bell compl.

Provided that you maintain your model helicopter conscientiously and set it up according to the instructions, the model's flying load limits are well outside its normal flight envelope.
Detail features of the kit are designed to suit normal applications, but different parts can be retro-fitted at any time, e.g. if you wish to convert a Kobold into a mechanical system for a full-fuselage model. To extend the load limits further you can use this freewheel and/or this hub (if you want a driven tail rotor for auto-rotation). However, both must only be used in conjunction with the pinion shaft 41/25. The outside diameter is 59 mm in both cases.
Freewheel bell, reinforced, with two 10 mm diameter freewheel bearings and GRP internal-tooth gear.

Donnez votre avis
16 other products in the same category:
Bellcrank set 60 degree Quick view

Reference: 61/20

Bellcrank set 60 degree

Review(s): 0

The ballraced 60° bellcrank, for example, is positioned between the horizontal pushrod from the throttle servo and the pushrod running to the barrel arm on the carburettor. When the arm below the ball is vertical the engine is stopped. When the 60° arm is horizontal the engine is at full throttle.In models with overhead tail rotor (e.g. BK 117, BO 105)...

Price 32.30€
More
On sale upon request

Suivez-nous sur Facebook

Facebook