

No brand
Référence: 2017 E
Référence: 97/4
When you build your first model helicopter you will find all the linkage components required to connect the servos to the mechanics supplied with the RC set (German radio systems only). When you come to installing servos in other models you can use this servo linkage set which contains all the link balls, screws, nuts and screw-fitting pushrod...
If you prefer to mount the tail rotor servo in the mechanics rather than inside the fuselage, this is the accessory you need.
Política de seguridad
Política de envío
Política de devolución
If you prefer to mount the tail rotor servo in the mechanics rather than inside the fuselage, this is the accessory you need.
Aucun avis n'a été publié pour le moment.
Référence: 107/12
Chrome-plated brass balls are used to screw onto bell cranks or servo arms for connection to the ball-links of pushrods. The chromium plating prevents premature wear of the ball links.Content of the package: 25 pieces
Référence: 36/4
The freewheel disc is positioned on the spigot of the main rotor shaft, with the inner flange in contact with the inner ring of the ballrace in the main gearbox. If you install a driven tail rotor for auto-rotation, a second disc is fitted at the underside of the gearbox, to prevent friction of the rotating parts against the outer ring of the ballrace....
Référence: 105/41
Strut holder, square bar, aluminium Content of the package: 1 piece
Référence: 53
At the top of the mechanics the dome plate supports the rotor shaft with the help of a 10 x 21 x 5 mm or 12 x 21 x 5 mm ballrace. To reduce the load on the ballrace a thrust bearing can also be fitted under the dome plate.
Référence: 412/15
For Bell 412, Ord.No. 4125 when using JetCat PHT2 turbine
Référence: 830/53
Bottom structure for petrol mechanics
Référence: 603/42
Mechanics support, rear, aluminium Content of the package: 2 piece
If you prefer to mount the tail rotor servo in the mechanics rather than inside the fuselage, this is the accessory you need.